记录1

GeliBusinessPlatform.xcodeproj/project.pbxproj

@@ -168,7 +168,7 @@
 		E042F74124528CD500CDFA12 /* TitleAndOnlyBtnCell.xib in Resources */ = {isa = PBXBuildFile; fileRef = E042F73F24528CD500CDFA12 /* TitleAndOnlyBtnCell.xib */; };
 		E042F74324529B7B00CDFA12 /* JiTuoWuXinXiView.swift in Sources */ = {isa = PBXBuildFile; fileRef = E042F74224529B7B00CDFA12 /* JiTuoWuXinXiView.swift */; };
 		E042F74524529B8500CDFA12 /* JiTuoWuXinXiView.xib in Resources */ = {isa = PBXBuildFile; fileRef = E042F74424529B8500CDFA12 /* JiTuoWuXinXiView.xib */; };
-		E044B97D25E5FCAA005BE090 /* GSDK.a in Frameworks */ = {isa = PBXBuildFile; fileRef = E044B97425E5FCAA005BE090 /* GSDK.a */; };
+		E044BA1B25E61E3C005BE090 /* libGSDK.a in Frameworks */ = {isa = PBXBuildFile; fileRef = E044BA1A25E61E3C005BE090 /* libGSDK.a */; };
 		E0516F772448003D00E373CE /* PayViewController.swift in Sources */ = {isa = PBXBuildFile; fileRef = E0516F752448003D00E373CE /* PayViewController.swift */; };
 		E0516F782448003D00E373CE /* PayViewController.xib in Resources */ = {isa = PBXBuildFile; fileRef = E0516F762448003D00E373CE /* PayViewController.xib */; };
 		E0516F7F244806C500E373CE /* MsgCenterViewController.swift in Sources */ = {isa = PBXBuildFile; fileRef = E0516F7E244806C500E373CE /* MsgCenterViewController.swift */; };
@@ -888,13 +888,14 @@
 		E042F73F24528CD500CDFA12 /* TitleAndOnlyBtnCell.xib */ = {isa = PBXFileReference; lastKnownFileType = file.xib; path = TitleAndOnlyBtnCell.xib; sourceTree = "<group>"; };
 		E042F74224529B7B00CDFA12 /* JiTuoWuXinXiView.swift */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.swift; path = JiTuoWuXinXiView.swift; sourceTree = "<group>"; };
 		E042F74424529B8500CDFA12 /* JiTuoWuXinXiView.xib */ = {isa = PBXFileReference; lastKnownFileType = file.xib; path = JiTuoWuXinXiView.xib; sourceTree = "<group>"; };
-		E044B97425E5FCAA005BE090 /* GSDK.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; path = GSDK.a; sourceTree = "<group>"; };
-		E044B97725E5FCAA005BE090 /* EthernetConnecter.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = EthernetConnecter.h; sourceTree = "<group>"; };
-		E044B97825E5FCAA005BE090 /* EscCommand.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = EscCommand.h; sourceTree = "<group>"; };
-		E044B97925E5FCAA005BE090 /* ConnecterBlock.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ConnecterBlock.h; sourceTree = "<group>"; };
-		E044B97A25E5FCAA005BE090 /* TscCommand.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = TscCommand.h; sourceTree = "<group>"; };
-		E044B97B25E5FCAA005BE090 /* BLEConnecter.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = BLEConnecter.h; sourceTree = "<group>"; };
-		E044B97C25E5FCAA005BE090 /* Connecter.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = Connecter.h; sourceTree = "<group>"; };
+		E044BA1325E61E3C005BE090 /* ReliableBurstData.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ReliableBurstData.h; sourceTree = "<group>"; };
+		E044BA1425E61E3C005BE090 /* DeviceInfo.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = DeviceInfo.h; sourceTree = "<group>"; };
+		E044BA1525E61E3C005BE090 /* EscCommand.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = EscCommand.h; sourceTree = "<group>"; };
+		E044BA1625E61E3C005BE090 /* CBController.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = CBController.h; sourceTree = "<group>"; };
+		E044BA1725E61E3C005BE090 /* MyPeripheral.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = MyPeripheral.h; sourceTree = "<group>"; };
+		E044BA1825E61E3C005BE090 /* TscCommand.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = TscCommand.h; sourceTree = "<group>"; };
+		E044BA1925E61E3C005BE090 /* BLKWrite.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = BLKWrite.h; sourceTree = "<group>"; };
+		E044BA1A25E61E3C005BE090 /* libGSDK.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; path = libGSDK.a; sourceTree = "<group>"; };
 		E0516F752448003D00E373CE /* PayViewController.swift */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.swift; path = PayViewController.swift; sourceTree = "<group>"; };
 		E0516F762448003D00E373CE /* PayViewController.xib */ = {isa = PBXFileReference; lastKnownFileType = file.xib; path = PayViewController.xib; sourceTree = "<group>"; };
 		E0516F7E244806C500E373CE /* MsgCenterViewController.swift */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.swift; path = MsgCenterViewController.swift; sourceTree = "<group>"; };
@@ -1499,13 +1500,13 @@
 				E09B3AE324B3011B00E3B238 /* libz.1.2.5.tbd in Frameworks */,
 				E0707DC72462457200E039A8 /* libz.tbd in Frameworks */,
 				E09B3AE024B2FE0200E3B238 /* libicucore.tbd in Frameworks */,
+				E044BA1B25E61E3C005BE090 /* libGSDK.a in Frameworks */,
 				E039848C2468F27800DFA56F /* libsqlite3.tbd in Frameworks */,
 				E09B3ADE24B2FDC600E3B238 /* JavaScriptCore.framework in Frameworks */,
 				E0AA7F362589A8AA0099193F /* jpush-ios-3.4.0.a in Frameworks */,
 				F96A581D24790D9A0070A057 /* libxml2.2.tbd in Frameworks */,
 				E09B3AD424B2FCAF00E3B238 /* ShareSDKConfigFile.framework in Frameworks */,
 				E09B3ADA24B2FCAF00E3B238 /* ShareSDK.framework in Frameworks */,
-				E044B97D25E5FCAA005BE090 /* GSDK.a in Frameworks */,
 				E09B3AD924B2FCAF00E3B238 /* WechatConnector.framework in Frameworks */,
 				E02870C7258C547E00271055 /* MAMapKit.framework in Frameworks */,
 				F93E32092473CD6500524DFC /* libresolv.tbd in Frameworks */,
@@ -1941,27 +1942,20 @@
 			path = "下运单";
 			sourceTree = "<group>";
 		};
-		E044B97525E5FCAA005BE090 /* include */ = {
+		E044BA1225E61E3C005BE090 /* include */ = {
 			isa = PBXGroup;
 			children = (
-				E044B97625E5FCAA005BE090 /* GSDK */,
+				E044BA1325E61E3C005BE090 /* ReliableBurstData.h */,
+				E044BA1425E61E3C005BE090 /* DeviceInfo.h */,
+				E044BA1525E61E3C005BE090 /* EscCommand.h */,
+				E044BA1625E61E3C005BE090 /* CBController.h */,
+				E044BA1725E61E3C005BE090 /* MyPeripheral.h */,
+				E044BA1825E61E3C005BE090 /* TscCommand.h */,
+				E044BA1925E61E3C005BE090 /* BLKWrite.h */,
 			);
 			path = include;
 			sourceTree = "<group>";
 		};
-		E044B97625E5FCAA005BE090 /* GSDK */ = {
-			isa = PBXGroup;
-			children = (
-				E044B97725E5FCAA005BE090 /* EthernetConnecter.h */,
-				E044B97825E5FCAA005BE090 /* EscCommand.h */,
-				E044B97925E5FCAA005BE090 /* ConnecterBlock.h */,
-				E044B97A25E5FCAA005BE090 /* TscCommand.h */,
-				E044B97B25E5FCAA005BE090 /* BLEConnecter.h */,
-				E044B97C25E5FCAA005BE090 /* Connecter.h */,
-			);
-			path = GSDK;
-			sourceTree = "<group>";
-		};
 		E04DFF092490695A002A6931 /* 采购单详情 */ = {
 			isa = PBXGroup;
 			children = (
@@ -2346,8 +2340,8 @@
 		E09B3AB624B2FCAF00E3B238 /* SDK */ = {
 			isa = PBXGroup;
 			children = (
-				E044B97425E5FCAA005BE090 /* GSDK.a */,
-				E044B97525E5FCAA005BE090 /* include */,
+				E044BA1225E61E3C005BE090 /* include */,
+				E044BA1A25E61E3C005BE090 /* libGSDK.a */,
 				E09B3AB724B2FCAF00E3B238 /* ShareSDK */,
 				E09B3ACD24B2FCAF00E3B238 /* Required */,
 			);

GeliBusinessPlatform/Define/Bridge_Header.h

@@ -26,8 +26,9 @@
 
 #import "JZLocationConverter.h"
 
-//#import "TscCommand.h"
-//#import "BLEConnecter.h"
-//#import "EthernetConnecter.h"
-//#import "Connecter.h"
+#import "TscCommand.h"
+#import "CBController.h"
+#import "DeviceInfo.h"
+#import "BLKWrite.h"
+
 #endif /* Bridge_Header_h */

GeliBusinessPlatform/Other/SDK/include/BLKWrite.h

+//
+//  BLKWrite.h
+//  Gprinter
+//
+//  Created by Wind on 14/12/20.
+//  Copyright (c) 2014年 JiaBo. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import "MyPeripheral.h"
+
+/*
+ 调用Wi-Fi模式
+    1 [BLKWrite Instance].bWiFiMode = YES
+    2 [BLKWrite Instance] 设置ServerIP、port
+    3 [[BLKWrite Instance] initWiFiClient];
+    4 TSC：-(void) writeTscData:(NSData*) data withResponse;
+    5 ESC：-(void) writeEscData:(NSData*) data withResponse;
+ 
+ 获取打印机纸张宽度
+    1 校验后
+    2[[BLKWrite Instance] PrintWidth];
+ 
+ */
+
+
+@interface BLKWrite : NSObject<MyPeripheralDelegate>
+
+@property (nonatomic, strong) MyPeripheral *connectedPeripheral;
+@property (nonatomic, assign) BOOL bWiFiMode; //YES: Wi-Fi模式；NO：蓝牙模式
+@property (nonatomic, strong) NSString *serverIP;
+@property (nonatomic, assign) int port;
+
+
++(BLKWrite*) Instance;
+
+-(void) writeTscData:(NSData*) data withResponse:(BOOL) flag;
+-(void) writeEscData:(NSData*) data withResponse:(BOOL) flag;
+-(BOOL) isConnecting;
+
+-(void) setPeripheral:(MyPeripheral*) peripheral;
+
+#pragma mark-Wi-Fi Mode
+-(void) initWiFiClient;
+
+#pragma mark-
+
+-(int) PrintWidth;
+
+@end

GeliBusinessPlatform/Other/SDK/include/CBController.h

+//
+//  CBController.h
+//  BLETR
+//
+//  Created by user D500 on 12/2/15.
+//  Copyright (c) 2012年 __MyCompanyName__. All rights reserved.
+//
+
+#import <UIKit/UIKit.h>
+#import <CoreBluetooth/CoreBluetooth.h>
+#import "MyPeripheral.h"
+
+enum {
+    LE_STATUS_IDLE = 0,
+    LE_STATUS_SCANNING,
+    LE_STATUS_CONNECTING,
+    LE_STATUS_CONNECTED
+};
+
+
+@interface MultiDevice : NSObject
+@property(nonatomic, assign) NSInteger index;//0：ISSC；1：红果
+@property(nonatomic, assign) BOOL connected;//是否已经连接
+@end
+
+
+@protocol CBControllerDelegate;
+@interface CBController : UIViewController<CBCentralManagerDelegate, CBPeripheralDelegate,ReliableBurstDataDelegate>
+{
+    CBCentralManager *manager;
+    NSMutableArray *devicesList;
+    BOOL    notifyState;
+    NSMutableArray *_connectedPeripheralList;
+    CBUUID *_transServiceUUID;
+    CBUUID *_transTxUUID;
+    CBUUID *_transRxUUID;
+    CBUUID *_disUUID1;
+    CBUUID *_disUUID2;
+    BOOL    isISSCPeripheral;
+}
+
+@property(assign) id<CBControllerDelegate> delegate;
+@property (retain) NSMutableArray *devicesList;
+
+- (void) startScan;
+- (void) stopScan;
+- (void)connectDevice:(MyPeripheral *) myPeripheral;
+- (void)disconnectDevice:(MyPeripheral *) aPeripheral;
+- (NSMutableData *) hexStrToData: (NSString *)hexStr;
+- (BOOL) isLECapableHardware;
+- (void)addDiscoverPeripheral:(CBPeripheral *)aPeripheral advName:(NSString *)advName;
+- (void)updateDiscoverPeripherals;
+- (void)updateMyPeripheralForDisconnect:(MyPeripheral *)myPeripheral;
+- (void)updateMyPeripheralForNewConnected:(MyPeripheral *)myPeripheral;
+- (void)storeMyPeripheral: (CBPeripheral *)aPeripheral;
+- (MyPeripheral *)retrieveMyPeripheral: (CBPeripheral *)aPeripheral;
+- (void)removeMyPeripheral: (CBPeripheral *) aPeripheral;
+- (void)configureTransparentServiceUUID: (NSString *)serviceUUID txUUID:(NSString *)txUUID rxUUID:(NSString *)rxUUID;
+- (void)configureDeviceInformationServiceUUID: (NSString *)UUID1 UUID2:(NSString *)UUID2;
+@end
+
+@protocol CBControllerDelegate
+@required
+- (void)didUpdatePeripheralList:(NSArray *)peripherals;
+- (void)didConnectPeripheral:(MyPeripheral *)peripheral;
+- (void)didDisconnectPeripheral:(MyPeripheral *)peripheral;
+@end
\ No newline at end of file

GeliBusinessPlatform/Other/SDK/include/DeviceInfo.h

+//
+//  DeviceInfo.h
+//  BLETR
+//
+//  Created by d500_MacMini on 13/6/19.
+//  Copyright (c) 2013年 ISSC. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import "CBController.h"
+
+@interface DeviceInfo : NSObject
+
+@property(retain) MyPeripheral *myPeripheral;
+//@property(retain) ViewController *mainViewController;
+
+@end

GeliBusinessPlatform/Other/SDK/include/GSDK/EscCommand.h → GeliBusinessPlatform/Other/SDK/include/EscCommand.h

@@ -7,10 +7,11 @@
 //
 
 #import <Foundation/Foundation.h>
-#import <UIKit/UIKit.h>
 
 @interface EscCommand : NSObject
 
+@property(nonatomic, assign) BOOL hasResponse;
+
 /**
  * 方法说明：打印UPCA条码
  * @param content 数据范围0-9，长度为11位
@@ -19,7 +20,7 @@
 
 /**
  * 方法说明：插入文字
- * @param text 文本
+ * @param text
  */
 -(void) addText:(NSString*) text;
 
@@ -32,6 +33,7 @@
 /**
  * 方法说明：将字符串转成十六进制码
  * @param  str  命令字符串
+ * @return void
  */
 -(void) addStrToCommand:(NSString *) str;
 
@@ -46,24 +48,24 @@
  */
 -(void) addPrintAndFeedLines:(int) n;
 
-/**
- *  方法说明：换行
- */
--(void)addPrintAndLineFeed;
-
 /**
  * 方法说明：设置打印模式，0x1B 0x21 n(0-255)，根据n的值设置字符打印模式
- *@param n 二进制默认为00000000(0X0),10001000(0X88)表示下划线和加粗，00001000(0X08)表示加粗，10000000(0X80)表示下划线
+ * @param font     选择FONTA or FONTB
+ * @param emphasized    是否加粗
+ * @param doubleheight  是否倍高，当倍宽和倍高模式同时选择时，字符同时在横向和纵向放大两倍。
+ * @param doublewidth   是否倍宽
+ * @param underline     是否下划线
+	*参数n二进制默认为00000000(0X0),10001000(0X88)表示下划线和加粗，00001000(0X08)表示加粗，10000000(0X80)表示下划线
  */
 -(void) addPrintMode:(int) n;
 /**
  * 方法说明：设置国际字符集，默认为美国0
- * @param n 字符集编号
+ * @param set 字符集编号
  */
 -(void) addSetInternationalCharacterSet:(int) n;
 /**
  * 方法说明：设置字符是否旋转90°，默认为0
- * @param n 是否旋转
+ * @param enabel 是否旋转
  */
 -(void) addSet90ClockWiseRotatin:(int) n;
 
@@ -97,26 +99,26 @@
 
 /**
  * 方法说明：设置倒置模式 选择/取消倒置打印模式。
- * @param n  是否倒置，默认为0， 0 ≤n ≤255 当n的最低位为0时，取消倒置打印模式。当n的最低位为1时，选择倒置打印模式。只有n的最低位有效；
+ * @param enable  是否倒置，默认为0， 0 ≤n ≤255 当n的最低位为0时，取消倒置打印模式。当n的最低位为1时，选择倒置打印模式。只有n的最低位有效；
  */
 -(void) addSetUpsideDownMode:(int) n;
 
 /**
  * 方法说明：设置字符放大，限制为不放大和放大2倍，n=0x11
- * @param n = width | height 宽度放大倍数，0 ≤n ≤255 （1 ≤ 纵向放大倍数 ≤8，1 ≤ 横向放达倍数 ≤8）[描述]   用0 到2 位选择字符高度，4 到7 位选择字符宽度
+ * @param n= width | height 宽度放大倍数，0 ≤n ≤255 （1 ≤ 纵向放大倍数 ≤8，1 ≤ 横向放达倍数 ≤8）[描述]   用0 到2 位选择字符高度，4 到7 位选择字符宽度
  */
 -(void) addSetCharcterSize:(int) n;
 
 /**
  * 方法说明：设置反白模式，黑白反显打印模式
- * @param n  是否反白，当n的最低位为0时，取消反显打印模式。当n的最低位为1时，选择反显打印模式。只有n的最低位有效；
+ * @param enable  是否反白，当n的最低位为0时，取消反显打印模式。当n的最低位为1时，选择反显打印模式。只有n的最低位有效；
  */
 -(void) addSetReverseMode:(int) n;
 
 
 /**
  * 方法说明：打印机实时状态请求
- * @param n  PRINTER_STATUS  打印机状态 1 ≤n ≤4
+ * @param status  PRINTER_STATUS  打印机状态 1 ≤n ≤4
  *                PRINTER_OFFLINE 脱机状态
  *                PRINTER_ERROR   错误状态
  *                PRINTER_PAPER   纸张状态
@@ -125,7 +127,7 @@
 
 /**
  * 方法说明：设置切纸后走纸
- * @param n  走纸距离
+ * @param length  走纸距离
  */
 -(void) addCutPaperAndFeed:(int) n;
 
@@ -141,6 +143,7 @@
 
 /**
  * 方法说明：设置条码字符种类，选择HRI使用字体
+ * @param n 固定为0 0,48  标准ASCII码字符 (12 × 24)  1,49  压缩ASCII码字符 (9 × 17)
  */
 -(void) addSetBarcodeHRIFont;
 /**
@@ -207,7 +210,7 @@
 
 /**
  * 方法说明：addNVLOGO
- * @param n 序号，1<=n<=20 m默认为0
+ * @param n为序号，1<=n<=20 m默认为0
  */
 -(void) addNVLOGO:(int) n :(int) m;
 
@@ -233,19 +236,6 @@
 -(void) addESCBitmapwithM:(int) m withxL:(int) xL withxH:(int) xH withyL:(int) yL
             withyH:(int) yH withData:(NSData*) data;
 
-/**
- *  方法说明：打印光栅位图
- *  @param image 图片
- *  @param width 图片宽度
- */
--(void)addOriginrastBitImage:(UIImage *)image width:(int)width;
-
-/**
- *  方法说明：打印光栅位图
- *  @param image 图片
- */
--(void)addOriginrastBitImage:(UIImage *)image;
-
 /*
  正确的ESC指令下QRCode打印流程为四步：
  1、设定QRCode大小；（可以省略）
@@ -253,7 +243,7 @@
  3、将QRCode对应的文字信息存入打印机缓存中；（必须要有）
  4、发送打印QRCode命令。
  一共有四个命令对应上述四步。
- */
+*/
 /*
  1、设定QRCode大小；（可以省略）
  [格式] ASCII码 GS ( K pL pH cn fn n
@@ -263,7 +253,7 @@
  fn=67
  1 ≤n≤16
  [默认值] n=3
- */
+*/
 -(void) addQRCodeSizewithpL:(int) pL withpH:(int) pH withcn:(int) cn
             withyfn:(int) fn withn:(int) n;
 
@@ -276,7 +266,7 @@
  fn=69
  48≤n≤51
  [默认值] n=48
- */
+*/
 -(void) addQRCodeLevelwithpL:(int) pL withpH:(int) pH withcn:(int) cn
             withyfn:(int) fn withn:(int) n;
 			
@@ -292,7 +282,7 @@
  [描述] 存储QR CODE数据（d1...dk)到符号存储区
  [注释] • 将QRCode的数据存储到打印机中
  • 执行esc @或打印机掉电后，恢复默认值
- */
+*/
 -(void) addQRCodeSavewithpL:(int) pL withpH:(int) pH withcn:(int) cn
             withyfn:(int) fn withm:(int) m withData:(NSData*) data;
 
@@ -305,140 +295,90 @@
  fn=81
  m=48
  [描述] 打印QRCode条码，在发送此命令之前，需通过（ K< Function 180）命令将QRCode数据存储在打印机中。
- */
+*/
 -(void) addQRCodePrintwithpL:(int) pL withpH:(int) pH withcn:(int) cn
             withyfn:(int) fn withm:(int) m;
 
 /**
- * 方法说明：设置是否汉字字体
- * @param n  是否倍宽 是否倍高 是否下划线
- */
+* 方法说明：设置是否汉字字体
+* @param n  是否倍宽 是否倍高 是否下划线
+*/
 -(void) addSetKanjiFontMode:(int) n;
 
 /**
- * 方法说明：设置汉字有效
- */
+* 方法说明：设置汉字有效
+*/
 -(void) addSelectKanjiMode;
 
 /**
- * 方法说明：设置汉字下划线
- * @param n 根据 n 的值，选择或取消汉字的下划线：
- * n     功能
- * 0, 48 取消汉字下划线
- * 1, 49 选择汉字下划线（1 点宽）
- * 2, 50 选择汉字下划线（2点宽）
- */
+* 方法说明：设置汉字下划线
+* @param n 根据 n 的值，选择或取消汉字的下划线：
+* n     功能
+* 0, 48 取消汉字下划线
+* 1, 49 选择汉字下划线（1 点宽）
+* 2, 50 选择汉字下划线（2点宽）
+*/
 -(void)addSetKanjiUnderLine:(int) n;
 
 /**
- * 方法说明：设置汉字无效
- */
+* 方法说明：设置汉字无效
+*/
 -(void) addCancelKanjiMode;
 
 /**
- * 方法说明：设置字符右间距
- * @param  n  间距长度
- * 0 ≤ n≤255
- * [描述] 设置字符的右间距为[n×横向移动单位或纵向移动单位]英寸。
- * [注释] • 当字符放大时，右间距随之放大相同的倍数。
- * • 此命令设置的值在页模式和标准模式下是相互独立的。
- * • 横向或纵向移动单位由GS P指定。改变横向或纵向移动单位不改变当前右间距。
- * • GS P 命令可改变水平（和垂直）运动单位。但是该值不得小于最小水平移动量，
- * 并且必须为最小水平移动量的偶数单位。
- * • 标准模式下，使用横向移动单位。
- * • 最大右间距是31 .91 毫米（255/203 英寸） 。 任何超过这个值的设置都自动转换为最
- * 大右间距。
- * [默认值] n = 0
- */
+* 方法说明：设置字符右间距
+* @param  n  间距长度
+* 0 ≤ n≤255
+* [描述] 设置字符的右间距为[n×横向移动单位或纵向移动单位]英寸。
+* [注释] • 当字符放大时，右间距随之放大相同的倍数。
+* • 此命令设置的值在页模式和标准模式下是相互独立的。
+* • 横向或纵向移动单位由GS P指定。改变横向或纵向移动单位不改变当前右间距。
+* • GS P 命令可改变水平（和垂直）运动单位。但是该值不得小于最小水平移动量，
+* 并且必须为最小水平移动量的偶数单位。
+* • 标准模式下，使用横向移动单位。
+* • 最大右间距是31 .91 毫米（255/203 英寸） 。 任何超过这个值的设置都自动转换为最
+* 大右间距。
+* [默认值] n = 0
+*/
 -(void) addSetCharacterRightSpace:(int) n;
 
 /**
- * 方法说明：设置汉字左右间距
- * @param n1  左间距 0 ≤ n1 ≤ 255
- * @param n2 右间距 0 ≤ n2 ≤ 255
- */
+* 方法说明：设置汉字左右间距
+* @param n1  左间距 0 ≤ n1 ≤ 255
+* @param n2 右间距 0 ≤ n2 ≤ 255
+*/
 -(void) addSetKanjiLefttandRightSpace:(int) n1 :(int) n2;
 
 
 /**
- * 方法说明：设置加粗模式
- * @param n  是否加粗
- * 0 ≤ n ≤ 255
- * [描述] 选择或取消加粗模式
- * 当n的最低位为0时，取消加粗模式。
- * 当n的最低位为1 时，选择加粗模式。
- * [注释] • n只有最低位有效。
- * • ESC ! 同样可以选择/取消加粗模式，最后接收的命令有效。
- * [默认值] n = 0
- */
+* 方法说明：设置加粗模式
+* @param n  是否加粗
+* 0 ≤ n ≤ 255
+* [描述] 选择或取消加粗模式
+* 当n的最低位为0时，取消加粗模式。
+* 当n的最低位为1 时，选择加粗模式。
+* [注释] • n只有最低位有效。
+* • ESC ! 同样可以选择/取消加粗模式，最后接收的命令有效。
+* [默认值] n = 0
+*/
 -(void) addTurnEmphasizedModeOnOrOff:(int) n;
 
 /**
- * 方法说明：设置加重模式
- * @param n  是否加重
- * 0 ≤ n ≤ 255
- * [描述] 选择/取消双重打印模式。
- * • 当n的最低位为0时，取消双重打印模式。
- * • 当n的最低位为1 时，选择双重打印模式。
- * [注释] • n只有最低位有效。
- * • 该命令与加粗打印效果相同。
- * [默认值] n = 0
- */
+* 方法说明：设置加重模式
+* @param n  是否加重
+* 0 ≤ n ≤ 255
+* [描述] 选择/取消双重打印模式。
+* • 当n的最低位为0时，取消双重打印模式。
+* • 当n的最低位为1 时，选择双重打印模式。
+* [注释] • n只有最低位有效。
+* • 该命令与加粗打印效果相同。
+* [默认值] n = 0
+*/
 -(void) addTurnDoubleStrikeOnOrOff:(int) n;
 
 /**
- * 方法说明：发送16进制数据，例如data=0x0A或data=0x0D
- */
+* 方法说明：发送16进制数据，例如data=0x0A或data=0x0D
+*/
 -(void) addNSDataToCommand:(NSData*) data;
 
-/**
- *  方法说明：设置水平和垂直单位距离
- *  @param x    水平单位
- *  @param y    垂直单位
- */
--(void)addSetHorAndVerMotionUnitsX:(int)x Y:(int)y;
-
-/**
- *  方法说明：设置绝对打印位置
- *  @param n    与起始打印位置距离
- */
--(void)addSetAbsolutePrintPosition:(int)n;
-
-/**
- * 方法说明：设置打印宽度
- *
- * @param width
- *            打印宽度
- */
--(void)addSetPrintingAreaWidth:(int)width;
-
-
-/**
- *  方法说明: 票据默认倍高（重启不失效）
- *  @param n1 宽      默认为0，翻倍为1
- *  @param n2 高      默认为0，翻倍为1
- *  @param n3 汉字宽   默认为0，翻倍为1
- *  @param n4 汉字高   默认为0，翻倍为1
- */
--(void)receiptDoubleHeightOrDefaultPrintN1:(int)n1 N2:(int)n2 N3:(int)n3 N4:(int)n4;
-
-/**
- *  方法说明: 设置默认代码页
- *  @param n 代码页 n的参数范围为（0-10，16-32，50-89）
- */
--(void)setDefaultCodePage:(int)n;
-
-/**
- *  方法说明: 波特率
- *  @param baudRate 波特率
- */
--(void)setBaudRate:(int)baudRate;
-
-/**
- *  方法说明: 查询打印机电量。
- *  <p>返回值:  31（低电量）；32 (中电量)；33 (高电量)；35 (正在充电)</p>
- *
- */
--(void)queryElectricity;
 @end
\ No newline at end of file
-

GeliBusinessPlatform/Other/SDK/include/GSDK/BLEConnecter.h

-//
-//  Connecter.h
-//  GSDK
-//
-//  Created by 猿史森林 on 2018/6/15.
-//  Copyright © 2018年 Smarnet. All rights reserved.
-//
-
-#import "Connecter.h"
-#import <CoreBluetooth/CoreBluetooth.h>
-
-@interface BLEConnecter :Connecter
-
-@property(nonatomic,strong)CBCharacteristic *airPatchChar;
-@property(nonatomic,strong)CBCharacteristic *transparentDataWriteChar;
-@property(nonatomic,strong)CBCharacteristic *transparentDataReadOrNotifyChar;
-@property(nonatomic,strong)CBCharacteristic *connectionParameterChar;
-
-@property(nonatomic,strong)CBUUID *transServiceUUID;
-@property(nonatomic,strong)CBUUID *transTxUUID;
-@property(nonatomic,strong)CBUUID *transRxUUID;
-@property(nonatomic,strong)CBUUID *disUUID1;
-@property(nonatomic,strong)CBUUID *disUUID2;
-@property(nonatomic,strong)NSArray *serviceUUID;
-
-@property(nonatomic,copy)DiscoverDevice discover;
-@property(nonatomic,copy)UpdateState updateState;
-@property(nonatomic,copy)WriteProgress writeProgress;
-
-/**数据包大小，默认130个字节*/
-@property(nonatomic,assign)NSUInteger datagramSize;
-
-@property(nonatomic,strong)CBPeripheral *connPeripheral;
-
-//+(instancetype)sharedInstance;
-
-/**
- *  方法说明:设置特定的Service UUID，以及Service对应的具有读、写特征值
- *  @param serviceUUID 蓝牙模块的service uuid
- *  @param txUUID   具有写入权限特征值
- *  @param rxUUID   具有读取权限特征值
- */
-- (void)configureTransparentServiceUUID: (NSString *)serviceUUID txUUID:(NSString *)txUUID rxUUID:(NSString *)rxUUID;
-
-/**
- *  方法说明：扫描外设
- *  @param serviceUUIDs 需要连接的外设UUID
- *  @param options 其它可选操作
- *  @param discover 发现设备
- *         peripheral 发现的外设
- *         advertisementData
- *         RSSI 外设信号强度
- */
--(void)scanForPeripheralsWithServices:(nullable NSArray<CBUUID *> *)serviceUUIDs options:(nullable NSDictionary<NSString *, id> *)options discover:(void(^_Nullable)(CBPeripheral *_Nullable peripheral,NSDictionary<NSString *, id> *_Nullable advertisementData,NSNumber *_Nullable RSSI))discover;
-
-/**
- *  方法说明：停止扫描蓝牙外设
- */
--(void)stopScan;
-
-/**
- *  方法说明：更新蓝牙状态
- *  @param state 更新蓝牙状态
- */
--(void)didUpdateState:(void(^_Nullable)(NSInteger state))state;
-
-/**
- *  方法说明：连接外设
- *  @param peripheral 需要连接的外设
- *  @param options 其它可选操作
- *  @param timeout 连接超时
- *  @param connectState 连接状态
- */
--(void)connectPeripheral:(CBPeripheral *_Nullable)peripheral options:(nullable NSDictionary<NSString *,id> *)options timeout:(NSUInteger)timeout connectBlack:(void(^_Nullable)(ConnectState state)) connectState;
-
-/**
- *  方法说明：连接外设
- *  @param peripheral 需要连接的外设
- *  @param options 其它可选操作
- */
--(void)connectPeripheral:(CBPeripheral * _Nullable)peripheral options:(nullable NSDictionary<NSString *,id> *)options;
-
-/**
- *  方法说明：断开连接
- *  @param  peripheral 需要断开连接的外设
- */
--(void)closePeripheral:(nonnull CBPeripheral *)peripheral;
-
-/**
- *  方法说明: 往蓝牙模块中写入数据
- *  @param  data 往蓝牙模块中写入的数据
- *  @param  progress 写入数据的进度
- *  @param callBack 读取蓝牙模块返回数据
- */
--(void)write:(NSData *_Nullable)data progress:(void(^_Nullable)(NSUInteger total,NSUInteger progress))progress receCallBack:(void (^_Nullable)(NSData *_Nullable))callBack;
-
-/**
- *  方法说明: 往蓝牙模块中写入数据
- *  @param characteristic   特征值
- *  @param data 往蓝牙模块中写入的数据
- *  @param type  写入方式<b>CBCharacteristicWriteWithResponse</b>写入方式是带流控写入方式。<b>CBCharacteristicWriteWithoutResponse</b>不带流控写入方式 <p><b>@see CBCharacteristicWriteType</b></p>
- */
--(void)writeValue:(NSData *)data forCharacteristic:(nonnull CBCharacteristic *)characteristic type:(CBCharacteristicWriteType)type;
-@end

GeliBusinessPlatform/Other/SDK/include/GSDK/Connecter.h

-//
-//  Connecter.h
-//  GSDK
-//
-//  Created by 猿史森林 on 2018/6/16.
-//  Copyright © 2018年 Smarnet. All rights reserved.
-//
-#import <Foundation/Foundation.h>
-#import "ConnecterBlock.h"
-
-@interface Connecter:NSObject
-
-//读取数据
-@property(nonatomic,copy)ReadData readData;
-//连接状态
-@property(nonatomic,copy)ConnectDeviceState state;
-
-/**
- * 方法说明: 连接
- */
--(void)connect;
-
-/**
- *  方法说明: 连接到指定设备
- *  @param connectState 连接状态
- */
--(void)connect:(void(^)(ConnectState state))connectState;
-
-/**
- * 方法说明: 关闭连接
- */
--(void)close;
-
-/**
- *  发送数据
- *  向输出流中写入数据
- */
--(void)write:(NSData *)data receCallBack:(void(^)(NSData *data))callBack;
--(void)write:(NSData *)data;
-
-/**
- *  读取数据
- *  @parma data 读取到的数据
- */
--(void)read:(void(^)(NSData *data))data;
-
-@end

GeliBusinessPlatform/Other/SDK/include/GSDK/ConnecterBlock.h

-//
-//  ConnecterBlock.h
-//  GSDK
-//
-//  Created by 猿史森林 on 2018/6/16.
-//  Copyright © 2018年 Smarnet. All rights reserved.
-//
-
-#ifndef ConnecterBlock_h
-#define ConnecterBlock_h
-#import <CoreBluetooth/CBPeripheral.h>
-
-/**
- *  @enum ConnectState
- *  @discussion 连接状态
- *  @constant CONNECT_STATE_DISCONNECT ConnectDeviceState返回state为该状态是表示已断开连接
- *  @constant CONNECT_STATE_CONNECTING ConnectDeviceState返回state为该状态是表示正在连接中
- *  @constant CONNECT_STATE_CONNECTED  ConnectDeviceState返回state为该状态是表示连接成功
- *  @constant CONNECT_STATE_TIMEOUT    ConnectDeviceState返回state为该状态是表示连接超时
- *  @constant CONNECT_STATE_FAILT      ConnectDeviceState返回state为该状态是表示连接失败
- */
-typedef enum : NSUInteger {
-    NOT_FOUND_DEVICE,//未找到设备
-    CONNECT_STATE_DISCONNECT,//断开连接
-    CONNECT_STATE_CONNECTING,//连接中
-    CONNECT_STATE_CONNECTED,//连接上
-    CONNECT_STATE_TIMEOUT,//连接超时
-    CONNECT_STATE_FAILT//连接失败
-}ConnectState;
-
-/**发现设备*/
-typedef void(^DiscoverDevice)(CBPeripheral *_Nullable peripheral,NSDictionary<NSString *, id> * _Nullable advertisementData,NSNumber * _Nullable RSSI);
-/**蓝牙状态更新*/
-typedef void(^UpdateState)(NSInteger state);
-/**连接状态*/
-typedef void(^ConnectDeviceState)(ConnectState state);
-/**读取数据*/
-typedef void(^ReadData)(NSData * _Nullable data);
-/**发送数据进度  只适用于蓝牙发送数据*/
-typedef void(^WriteProgress)(NSUInteger total,NSUInteger progress);
-typedef void (^Error)(id error);
-
-#endif /* ConnecterBlock_h */

GeliBusinessPlatform/Other/SDK/include/GSDK/EthernetConnecter.h

-//
-//  EthernetConnecter.h
-//  GSDK
-//
-//  Created by 猿史森林 on 2018/6/16.
-//  Copyright © 2018年 猿史森林. All rights reserved.
-//
-
-#import "Connecter.h"
-
-@interface EthernetConnecter :Connecter
-/**连接设备的ip地址*/
-@property(nonatomic,strong)NSString *ip;
-/**连接设备的端口号*/
-@property(nonatomic,assign)int port;
-
-//+(instancetype)sharedInstance;
-
-/**
- *  方法说明: 连接设备
- *  @param ip 连接设备的ip地址
- *  @param port 连接设备的端口号
- *  @param connectState 连接状态    @see ConnectState
- *  @param callback 输入流数据回调
- */
--(void)connectIP:(NSString *)ip port:(int)port connectState:(void (^)(ConnectState state))connectState callback:(void(^)(NSData *data))callback;
-
--(void)connectIP:(NSString *)ip port:(int)port connectState:(void (^)(ConnectState))connectState;
-
-@end

GeliBusinessPlatform/Other/SDK/include/MyPeripheral.h

+//
+//  MyPeripheral.h
+//  BLETR
+//
+//  Created by D500 user on 13/5/30.
+//  Copyright (c) 2013年 ISSC. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import <CoreBluetooth/CoreBluetooth.h>
+#import "ReliableBurstData.h"
+
+#define AIR_PATCH_COMMAND_VENDOR_MP_ENABLE      0x03
+#define AIR_PATCH_COMMAND_XMEMOTY_READ          0x08
+#define AIR_PATCH_COMMAND_XMEMOTY_WRITE         0x09
+#define AIR_PATCH_COMMAND_E2PROM_READ           0x0a
+#define AIR_PATCH_COMMAND_E2PROM_WRITE          0x0b
+#define AIR_PATCH_COMMAND_READ                  0x24
+
+#define AIR_PATCH_SUCCESS   0x00
+
+#define AIR_PATCH_ACTION_CHANGE_DEVICE_NAME     0X01
+#define AIR_PATCH_ACTION_READ_ADVERTISE_DATA1   0X02
+#define AIR_PATCH_ACTION_READ_ADVERTISE_DATA2   0X03
+#define AIR_PATCH_ACTION_UPDATE_ADVERTISE_DATA  0X04
+#define AIR_PATCH_ACTION_CHANGE_DEVICE_NAME_MEMORY     0X05
+#define AIR_PATCH_ACTION_READ                   0X24
+
+#define ADVERTISE_DATA_TYPE_COMPLETE_DEVICE_NAME 0X09
+#define ADVERTISE_DATA_TYPE_SHORTEN_DEVICE_NAME  0X08
+
+enum {
+    MYPERIPHERAL_CONNECT_STATUS_IDLE = 0,
+    MYPERIPHERAL_CONNECT_STATUS_CONNECTING,
+    MYPERIPHERAL_CONNECT_STATUS_CONNECTED,
+};
+
+enum {
+    UPDATE_PARAMETERS_STEP_PREPARE = 0,
+    UPDATE_PARAMETERS_STEP_CHECK_RESULT,
+};
+typedef struct _AIR_PATCH_COMMAND_FORMAT
+{
+    unsigned char commandID;
+    char parameters[19];
+}__attribute__((packed)) AIR_PATCH_COMMAND_FORMAT;
+
+typedef struct _AIR_PATCH_EVENT_FORMAT
+{
+    char    status;
+    unsigned char commandID;
+    char parameters[16];
+}__attribute__((packed)) AIR_PATCH_EVENT_FORMAT;
+
+
+typedef struct _WRITE_EEPROM_COMMAND_FORMAT
+{
+    unsigned char addr[2];
+    unsigned char length;
+    char    data[16];
+}__attribute__((packed)) WRITE_EEPROM_COMMAND_FORMAT;
+
+typedef struct _CONNECTION_PARAMETER_FORMAT
+{
+    unsigned char status;
+    unsigned short minInterval;
+    unsigned short maxInterval;
+    unsigned short latency;
+    unsigned short connectionTimeout;
+}__attribute__((packed)) CONNECTION_PARAMETER_FORMAT;
+
+
+@protocol MyPeripheralDelegate;
+@interface MyPeripheral : NSObject
+{
+@private
+    char    advData[25];
+    char    deviceName[16];
+    NSMutableArray *queuedTask;
+}
+@property(assign) id<MyPeripheralDelegate> transDataDelegate;
+@property(assign) id<MyPeripheralDelegate> proprietaryDelegate;
+@property(assign) id<MyPeripheralDelegate> deviceInfoDelegate;
+
+@property (retain) CBPeripheral *peripheral;
+@property(copy) NSString *advName;
+@property(assign) uint8_t connectStaus;
+@property (assign) BOOL canSendData;
+
+//DIS
+@property(retain) CBCharacteristic *manufactureNameChar;
+@property(retain) CBCharacteristic *modelNumberChar;
+@property(retain) CBCharacteristic *serialNumberChar;
+@property(retain) CBCharacteristic *hardwareRevisionChar;
+@property(retain) CBCharacteristic *firmwareRevisionChar;
+@property(retain) CBCharacteristic *softwareRevisionChar;
+@property(retain) CBCharacteristic *systemIDChar;
+@property(retain) CBCharacteristic *certDataListChar;
+@property(retain) CBCharacteristic *specificChar1;
+@property(retain) CBCharacteristic *specificChar2;
+
+//Proprietary
+@property(retain) CBCharacteristic *airPatchChar;
+@property(retain) CBCharacteristic *transparentDataWriteChar;
+@property(retain) CBCharacteristic *transparentDataReadChar;
+@property(retain) CBCharacteristic *connectionParameterChar;
+@property(assign) uint8_t   updateConnectionParameterStep;
+@property(readonly) ReliableBurstData *transmit;
+
+@property(assign) CONNECTION_PARAMETER_FORMAT connectionParameter;
+@property(assign) CONNECTION_PARAMETER_FORMAT backupConnectionParameter;
+
+
+@property(assign) BOOL    vendorMPEnable;
+@property(assign) short   airPatchAction;
+@property(assign) BOOL    isNotifying;
+
+
+- (CONNECTION_PARAMETER_FORMAT *)retrieveBackupConnectionParameter;
+- (void)updateBackupConnectionParameter:(CONNECTION_PARAMETER_FORMAT *)parameter;
+- (BOOL)compareBackupConnectionParameter:(CONNECTION_PARAMETER_FORMAT *)parameter;
+
+- (void)checkConnectionParameterStatus;
+- (void)sendVendorMPEnable;
+- (void)updateAirPatchEvent: (NSData *)returnEvent;
+- (void)writeE2promValue: (short)address length:(short)length data:(char *)data;
+- (void)readE2promValue: (short)address length:(short)length;
+- (void)writeMemoryValue: (short)address length:(short)length data:(char *)data;
+- (void)readMemoryValue: (short)address length:(short)length;
+- (CBCharacteristicWriteType)sendTransparentData:(NSData *)data type:(CBCharacteristicWriteType)type;
+- (void)setTransDataNotification:(BOOL)notify;
+
+- (NSError *)setMaxConnectionInterval:(unsigned short)maxInterval connectionTimeout:(unsigned short)connectionTimeout connectionLatency:(unsigned short)connectionLatency;
+- (void)checkIsAllowUpdateConnectionParameter;
+- (void)changePeripheralName: (NSString *)name;
+
+- (void)readManufactureName;
+- (void)readModelNumber;
+- (void)readSerialNumber;
+- (void)readHardwareRevision;
+- (void)readFirmwareRevision;
+- (void)readSoftwareRevison;
+- (void)readSystemID;
+- (void)readCertificationData;
+- (void)readSpecificUUID1;
+- (void)readSpecificUUID2;
+
+@end
+
+
+@protocol MyPeripheralDelegate<NSObject>
+@optional
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateConnectionParameterAllowStatus:(BOOL)status;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateConnectionParameterStatus:(BOOL)status interval:(unsigned short)interval timeout:(unsigned short)timeout  latency:(unsigned short)latency;
+
+- (void)MyPeripheral:(MyPeripheral *)peripheral didChangePeripheralName:(NSError *)error;
+
+- (void)MyPeripheral:(MyPeripheral *)peripheral didReceiveTransparentData:(NSData *)data;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didReceiveMemoryAddress:(NSData *)address length:(short)length data:(NSData *)data;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didWriteMemoryAddress:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didSendTransparentDataStatus:(NSError *) error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateTransDataNotifyStatus:(BOOL)notify;
+
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateManufactureName:(NSString *)name error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateModelNumber:(NSString *)modelNumber error:(NSError *)error;
+
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateSerialNumber:(NSString *)serialNumber error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateHardwareRevision:(NSString *)hardwareRevision error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateFirmwareRevision:(NSString *)firmwareRevision error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateSoftwareRevision:(NSString *)softwareRevision error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateSystemId:(NSData *)systemId error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateIEEE_11073_20601:(NSData *)IEEE_11073_20601 error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateSpecificUUID1:(NSData *)value error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateSpecificUUID2:(NSData *)value error:(NSError *)error;
+@end

GeliBusinessPlatform/Other/SDK/include/ReliableBurstData.h

+//
+//  ReliableBurstData.h
+//  ReliableBurstData
+//
+//  Created by Rick on 14/2/19.
+//  Copyright (c) 2014 ISSC Technologies Corporation. All rights reserved.
+//
+
+/*!
+ *	@file ReliableBurstData.h
+ *	@framework ReliableBurstData
+ *
+ *  @discussion Entry point to the ReliableBurstTransmit.
+ *
+ *	@copyright 2014 ISSC Technologies Corporation. All rights reserved.
+ */
+
+#import <Foundation/Foundation.h>
+#import <CoreBluetooth/CoreBluetooth.h>
+
+@protocol ReliableBurstDataDelegate;
+@interface ReliableBurstData : NSObject
+
+/*!
+ *  @method                 				transmitSize
+ *
+ *  @return                 				Max package size to transmit
+ */
+- (NSUInteger)transmitSize;
+
+/*!
+ *  @method                                 reliableBurstTransmit:withTransparentCharacteristic:
+ *
+ *  @discussion                             Send reliableBurstTransmit with special characteristic
+ *
+ *  @param data                             Data to transmit
+ *  @param transparentDataWriteChar         Characteristic to transmit
+ */
+- (void)reliableBurstTransmit:(NSData *)data withTransparentCharacteristic:(CBCharacteristic *)transparentDataWriteChar;
+
+/*!
+ *  @method canSendReliableBurstTransmit
+ *  
+ *  @return                                 YES if the data can be sent, or NO if the transmission queue is full. If NO was returned,
+ *     										wait for it return YES to send new data.
+ */
+- (BOOL)canSendReliableBurstTransmit;
+
+/*!
+ *
+ *
+ *  @return                                 YES if the accessory can disconnect now, or NO if the transmission is busy.
+ *                                          If NO was returned, wait for it return YES to disconnect.
+ *  @discussion
+ *  For example:
+ *              int count = 0;
+                while (![reliableBurstData canDisconnect]) {
+                    sleep(1);
+                    count++;
+                    if (count >= 10) {
+                        break;
+                    }
+                }
+                dispatch_async(dispatch_get_main_queue(), ^{
+                    [manager cancelPeripheralConnection:peripheral];
+                });
+ */
+- (BOOL)canDisconnect;
+
+/*!
+ *  @method                                 decodeReliableBurstTransmitEvent:
+ *
+ *  @param eventData                        The eventData need to decode for reliableBurstTransmit
+ *
+ *  @discussion                             This method decodes the events of reliable burst transmition, it should parse all the values
+ *                                          of air patch characteristic first when receiving notifications.
+ *  For example:
+ *  - (void)updateAirPatchEvent: (NSData *)returnEvent {
+        [reliableBurstData decodeReliableBurstTransmitEvent:returnEvent];
+        ...
+    }
+ */
+- (void)decodeReliableBurstTransmitEvent:(NSData *)eventData;
+
+/*!
+ *  @method                                 enableReliableBurstTransmit:andAirPatchCharacteristic:
+ *
+ *  @param peripheral                       CBPeripheral to enable ReliableBurstTransmit
+ *  @param airPatchCharacteristic           CBCharacteristic with airPatch characteristic
+ *
+ *  @discussion                             Ues this method to enable ReliableBurstTransmit.
+ *                                          This method have to be called before sending data.
+ *  
+ *  For example:
+ *  - (void) peripheral:(CBPeripheral *)aPeripheral didDiscoverCharacteristicsForService:(CBService *)service error:(NSError *)error {
+        if ([service.UUID isEqual:[CBUUID UUIDWithString:UUIDSTR_ISSC_PROPRIETARY_SERVICE]])
+            for (aChar in service.characteristics)
+            {
+                if ([aChar.UUID isEqual:[CBUUID UUIDWithString:UUIDSTR_AIR_PATCH_CHAR]]) {
+                    [reliableBurstData enableReliableBurstTransmit:aPeripheral andAirPatchCharacteristic:aChar];
+                }
+            }
+    }
+
+ */
+- (void)enableReliableBurstTransmit:(CBPeripheral *)peripheral andAirPatchCharacteristic:(CBCharacteristic *)airPatchCharacteristic;
+
+/*!
+ *  @method                                 isReliableBurstTransmit:
+ *
+ *  @param transparentDataWriteChar         The parameter should input the CBCharacteristic object of didWriteValueForCharacteristic: delegate
+ *
+ *  @return                                 YES if writeValue:forCharacteristic:type: with CBCharacteristicWriteWithResponse type is call by ReliableBurstTransmit.
+ *
+ *  @discussion                             This library will use CBCharacteristicWriteWithResponse type when accessory doesn't
+ *                                          support ReliableBurstTransmit feature. This method informs library the data have been sent.
+ *  
+ *  For example:
+ *  - (void) peripheral:(CBPeripheral *)aPeripheral didWriteValueForCharacteristic:(CBCharacteristic *)characteristic error:(NSError *)error
+    {
+        if ([reliableBurstData isReliableBurstTransmit:characteristic]) {
+            return;
+        }
+        // Other code
+    }
+ *
+ */
+- (BOOL)isReliableBurstTransmit:(CBCharacteristic *)transparentDataWriteChar;
+
+/*!
+ *  @method                                 version
+ *
+ *  @return                                 Version number with major.minor format.
+ */
+- (NSString *)version;
+@property (nonatomic,weak)id<ReliableBurstDataDelegate>delegate;
+@end
+@protocol ReliableBurstDataDelegate <NSObject>
+
+/*!
+ *  @method                                 reliableBurstData:didSendDataWithCharacteristic:
+ *
+ *  @discussion                             This method is invoked when the data has been sent.
+ *  
+ */
+- (void)reliableBurstData:(ReliableBurstData *)reliableBurstData didSendDataWithCharacteristic:(CBCharacteristic *)transparentDataWriteChar;
+
+@end

GeliBusinessPlatform/Other/SDK/include/GSDK/TscCommand.h → GeliBusinessPlatform/Other/SDK/include/TscCommand.h

@@ -2,25 +2,21 @@
 //  TscCommand.h
 //  Gprinter
 //
-//  Created by Wind on 2018/6/15.
-//  Copyright (c) 2018年 Smarnet. All rights reserved.
+//  Created by Wind on 14/12/22.
+//  Copyright (c) 2014年 JiaBo. All rights reserved.
 //
 
 #import <Foundation/Foundation.h>
-#import <UIKit/UIKit.h>
-
-typedef NS_ENUM (NSUInteger,Response){
-    OFF     = 0,//关闭自动返回状态功能
-    ON      = 1,//打开自动返回状态功能，每打印完一张返回一次
-    BATCH   = 2,//打开自动返回状态功能，打印完毕后返回一次
-};
 
 @interface TscCommand : NSObject
 
+@property(nonatomic, assign) BOOL hasResponse;
+
 /**
  * 方法说明：设置标签尺寸的宽和高
  * @param width  标签宽度
  * @param height 标签高度
+ * @return void
  */
 -(void) addSize:(int) width :(int) height;
 
@@ -28,6 +24,7 @@ typedef NS_ENUM (NSUInteger,Response){
  * 方法说明：设置标签间隙尺寸 单位mm
  * @param m    间隙长度
  * @param n    间隙偏移
+ * @return void
  */
 -(void) addGapWithM:(int) m withN:(int) n;
 
@@ -35,29 +32,34 @@ typedef NS_ENUM (NSUInteger,Response){
  * 方法说明：设置标签原点坐标
  * @param x  横坐标
  * @param y  纵坐标
+ * @return void
  */
 -(void) addReference:(int) x :(int)y;
 
 /**
  * 方法说明：设置打印速度
  * @param speed  打印速度
+ * @return void
  */
 -(void) addSpeed:(int) speed;
 
 /**
  * 方法说明：设置打印浓度
  * @param density  浓度
+ * @return void
  */
 -(void) addDensity:(int) density;
 
 /**
  * 方法说明：设置打印方向
  * @param direction  方向
+ * @return void
  */
 -(void) addDirection:(int) direction;
 
 /**
  * 方法说明：清除打印缓冲区
+ * @return void
  */
 -(void) addCls;
 
@@ -67,11 +69,13 @@ typedef NS_ENUM (NSUInteger,Response){
  * @param y 纵坐标
  * @param font  字体类型
  * @param rotation  旋转角度
- * @param xScal  横向放大
- * @param yScal  纵向放大
+ * @param Xscal  横向放大
+ * @param Yscal  纵向放大
  * @param text   文字字符串
+ * @return void
  */
--(void) addTextwithX:(int)x withY:(int)y withFont:(NSString*)font withRotation:(int)rotation withXscal:(int)xScal withYscal:(int)yScal withText:(NSString*) text;
+-(void) addTextwithX:(int)x withY:(int) y withFont:(NSString*) font
+        withRotation:(int) rotation withXscal:(int) Xscal withYscal:(int) Yscal withText:(NSString*) text;
 
 /*
  BITMAP X, Y, width, height, mode, bitmap data
@@ -86,23 +90,21 @@ typedef NS_ENUM (NSUInteger,Response){
  2 XOR
  bitmap data 影像数据
  */
--(void) addBitmapwithX:(int)x withY:(int) y withWidth:(int) width withHeight:(int) height withMode:(int) mode withData:(NSData*) data;
-
--(void)addBitmapwithX:(int)x withY:(int)y withMode:(int)mode withWidth:(int)width withImage:(UIImage *)image;
-
--(void)addBitmapwithX:(int)x withY:(int)y withMode:(int)mode withImage:(UIImage *)image;
+-(void) addBitmapwithX:(int)x withY:(int) y withWidth:(int) width
+            withHeight:(int) height withMode:(int) mode withData:(NSData*) data;
 
 /**
  * 方法说明:在标签上绘制一维条码
  * @param x 横坐标
  * @param y 纵坐标
- * @param barcodeType 条码类型
+ * @param barcodetype 条码类型
  * @param height  条码高度，默认为40
  * @param readable  是否可识别，0:  人眼不可识，1:   人眼可识
  * @param rotation  旋转角度，条形码旋转角度，顺时钟方向，0不旋转，90顺时钟方向旋转90度，180顺时钟方向旋转180度，270顺时钟方向旋转270度
- * @param narrow 默认值2，窄 bar  宽度，以点(dot)表示
- * @param wide 默认值4，宽 bar  宽度，以点(dot)表示
+ * @param Narrow 默认值2，窄 bar  宽度，以点(dot)表示
+ * @param Wide 默认值4，宽 bar  宽度，以点(dot)表示
  * @param content   条码内容
+ * @return void
  BARCODE X,Y,"code type",height,human readable,rotation,narrow,wide,"code"
  BARCODE 100,100,"39",40,1,0,2,4,"1000"
  BARCODE 10,10,"128",40,1,0,2,2,"124096ABCDEFZ$%+-./*"
@@ -114,7 +116,8 @@ typedef NS_ENUM (NSUInteger,Response){
  CODE39("39"),
  CODE128("128"),
  */
--(void) add1DBarcode:(int)x :(int)y :(NSString*)barcodeType :(int)height :(int)readable :(int)rotation :(int)narrow :(int)wide :(NSString*)content;
+-(void) add1DBarcode:(int)x :(int)y :(NSString*)barcodetype :(int)height
+                    :(int)readable :(int)rotation :(int)Narrow :(int)Wide :(NSString*)content;
 
 /**
  * 方法说明:在标签上绘制QRCode二维码
@@ -125,26 +128,31 @@ typedef NS_ENUM (NSUInteger,Response){
  * @param mode  默认为A，A为Auto,M为Manual
  * @param rotation  旋转角度，QRCode二维旋转角度，顺时钟方向，0不旋转，90顺时钟方向旋转90度，180顺时钟方向旋转180度，270顺时钟方向旋转270度
  * @param content   条码内容
+ * @return void
  * QRCODE X,Y ,ECC LEVER ,cell width,mode,rotation, "data string"
  * QRCODE 20,24,L,4,A,0,"佳博集团网站www.Gprinter.com.cn"
  */
--(void) addQRCode:(int)x :(int)y :(NSString*)ecclever :(int)cellwidth :(NSString*)mode :(int)rotation :(NSString*)content;
+-(void) addQRCode:(int)x :(int)y :(NSString*)ecclever :(int)cellwidth
+                    :(NSString*)mode :(int)rotation :(NSString*)content;
 
 /**
  * 方法说明：执行打印
  * @param m
  * @param n
+ * @return void
  */
 -(void) addPrint:(int) m :(int) n;
 
 /**
  * 方法说明:获得打印命令
+ * @return NSData*
  */
 -(NSData*) getCommand;
 
 /**
  * 方法说明：将字符串转成十六进制码
  * @param  str  命令字符串
+ * @return void
  */
 -(void) addStrToCommand:(NSString *) str;
 
@@ -152,47 +160,55 @@ typedef NS_ENUM (NSUInteger,Response){
 
 /**
  * 方法说明：发送一些TSC的固定命令，在cls命令之前发送
+ * @return void
  */
 -(void) addComonCommand;
 
 /**
  * 方法说明:打印自检页，打印测试页
+ * @return void
  */
 -(void) addSelfTest;
 
 /**
  * 方法说明 :查询打印机型号
+ * @return void
  */
 -(void) queryPrinterType;
 
 /**
  * 方法说明:设置打印机剥离模式
- * @param peel ON/OFF  是否开启
+ * @param ON/OFF  是否开启
+ * @return void
  */
--(void) addPeel:(NSString *) peel;
+-(void) addPeel:(NSString *) strpar;
 
 /**
  * 方法说明:设置打印机撕离模式
- * @param tear ON/OFF 是否开启
+ * @param ON/OFF 是否开启
+ * @return void
  */
--(void) addTear:(NSString *) tear;
+-(void) addTear:(NSString *) strpar;
 
 /**
  * 方法说明:设置切刀是否有效
- * @param cutter 是否开启 OFF/pieces (0<=pieces<=127)设定几张标签切一次
+ * @param 是否开启 OFF/pieces (0<=pieces<=127)设定几张标签切一次
+ * @return void
  */
--(void) addCutter:(NSString *) cutter;
+-(void) addCutter:(NSString *) strpar;
 
 /**
  * 方法说明:设置切刀半切是否有效
- * @param cutter  是否开启
+ * @param enable  是否开启
+ * @return void
  */
--(void) addPartialCutter:(NSString *) cutter;
+-(void) addPartialCutter:(NSString *) strpar;
 
 /**
  * 方法说明：设置蜂鸣器
  * @param level 频率
  * @param interval  时间ms
+ * @return void
  */
 -(void) addSound:(int) level :(int) interval;
 
@@ -201,6 +217,7 @@ typedef NS_ENUM (NSUInteger,Response){
  * @param m  钱箱号 m      0，48  钱箱插座的引脚2        1，49  钱箱插座的引脚5
  * @param t1   高电平时间0 ≤ t1 ≤ 255输出由t1和t2设定的钱箱开启脉冲到由m指定的引脚
  * @param t2   低电平时间0 ≤ t2 ≤ 255输出由t1和t2设定的钱箱开启脉冲到由m指定的引脚
+ * @return void
  */
 -(void) addCashdrawer:(int) m :(int) t1 :(int) t2;
 
@@ -210,49 +227,37 @@ typedef NS_ENUM (NSUInteger,Response){
  * @param y 起始纵坐标
  * @param width 线宽，以点(dot)表示
  * @param height 线高，以点(dot)表示
+ * @return void
  */
 -(void) addBar:(int) x :(int) y :(int) width :(int) height;
 
 /**
  * 方法说明:在标签上绘制矩形
- * @param xStart 起始横坐标
- * @param yStart 起始纵坐标
- * @param xEnd 终点横坐标
- * @param yEnd 终点纵坐标
- * @param lineThickness 矩形框线厚度或宽度，以点(dot)表示
+ * @param xstart 起始横坐标
+ * @param ystart 起始纵坐标
+ * @param xend 终点横坐标
+ * @param yend 终点纵坐标
+ * @param linethickness 矩形框线厚度或宽度，以点(dot)表示
+ * @return void
  */
--(void) addBox:(int) xStart :(int) yStart :(int) xEnd :(int) yEnd :(int) lineThickness;
+-(void) addBox:(int) xstart :(int) ystart :(int) xend :(int) yend :(int) linethickness;
 
 /**
  * 方法说明:查询打印机状态<ESC>!?
 	*询问打印机状态指令为立即响应型指令，该指令控制字符是以<ESC> (ASCII 27=0x1B, escape字符)为控制字符.!(ASCII 33=0x21),?(ASCII 63=0x3F)
 	*即使打印机在错误状态中仍能透过 RS-232  回传一个 byte  资料来表示打印机状态，若回传值为 0  则表示打印
 	*机处于正常的状态
+ * @return void
  */
 -(void) queryPrinterStatus;
 
 /**
  * 方法说明:将指定的区域反向打印（黑色变成白色，白色变成黑色）
- * @param xStart 起始横坐标
- * @param yStart 起始横坐标
- * @param xWidth X坐标方向宽度，dot为单位
- * @param yHeight Y坐标方向高度，dot为单位
+ * @param xstart 起始横坐标
+ * @param ystart 起始横坐标
+ * @param xwidth X坐标方向宽度，dot为单位
+ * @param yheight Y坐标方向高度，dot为单位
  */
--(void) addReverse:(int) xStart :(int) yStart :(int) xWidth :(int) yHeight;
+-(void) addReverse:(int) xstart :(int) ystart :(int) xwidth :(int) yheight;
 
-/**
- *  方法说明: 打印机打印完成时，自动返回状态。可用于实现连续打印功能
- *  @param response  自动返回状态  <a>@see Response</a>
- *                  OFF     关闭自动返回状态功能
- *                  ON      开启自动返回状态功能
- *                  BATCH   全部打印完成后返回状态
- */
--(void)addQueryPrinterStatus:(Response)response;
-
-/**
- *  方法说明: 查询打印机电量。
- *  <p>返回值:  31（低电量）；32 (中电量)；33 (高电量)；35 (正在充电)</p>
- *
- */
--(void)queryElectricity;
 @end

GeliBusinessPlatform/ViewController/蓝牙连接/BluetoothConnectViewController.swift

@@ -8,7 +8,8 @@
 
 import UIKit
 import Dollar
-class BluetoothConnectViewController: BaseViewController,UITableViewDelegate,UITableViewDataSource, CBPeripheralDelegate {
+
+class BluetoothConnectViewController: BaseViewController,UITableViewDelegate,UITableViewDataSource,CBPeripheralDelegate {
 
     
 
@@ -99,6 +100,8 @@ class BluetoothConnectViewController: BaseViewController,UITableViewDelegate,UIT
         
         
     }
+    
+    
     //MARK:--发现外围设备服务1
     func peripheral(_ peripheral: CBPeripheral, didDiscoverServices error: Error?) {
         //遍历服务