gprintersdk

GeliBusinessPlatform.xcodeproj/project.pbxproj

@@ -168,6 +168,7 @@
 		E042F74124528CD500CDFA12 /* TitleAndOnlyBtnCell.xib in Resources */ = {isa = PBXBuildFile; fileRef = E042F73F24528CD500CDFA12 /* TitleAndOnlyBtnCell.xib */; };
 		E042F74324529B7B00CDFA12 /* JiTuoWuXinXiView.swift in Sources */ = {isa = PBXBuildFile; fileRef = E042F74224529B7B00CDFA12 /* JiTuoWuXinXiView.swift */; };
 		E042F74524529B8500CDFA12 /* JiTuoWuXinXiView.xib in Resources */ = {isa = PBXBuildFile; fileRef = E042F74424529B8500CDFA12 /* JiTuoWuXinXiView.xib */; };
+		E048C1A225CBA0480008296F /* libGSDK.a in Frameworks */ = {isa = PBXBuildFile; fileRef = E048C1A125CBA0470008296F /* libGSDK.a */; };
 		E0516F772448003D00E373CE /* PayViewController.swift in Sources */ = {isa = PBXBuildFile; fileRef = E0516F752448003D00E373CE /* PayViewController.swift */; };
 		E0516F782448003D00E373CE /* PayViewController.xib in Resources */ = {isa = PBXBuildFile; fileRef = E0516F762448003D00E373CE /* PayViewController.xib */; };
 		E0516F7F244806C500E373CE /* MsgCenterViewController.swift in Sources */ = {isa = PBXBuildFile; fileRef = E0516F7E244806C500E373CE /* MsgCenterViewController.swift */; };
@@ -885,6 +886,14 @@
 		E042F73F24528CD500CDFA12 /* TitleAndOnlyBtnCell.xib */ = {isa = PBXFileReference; lastKnownFileType = file.xib; path = TitleAndOnlyBtnCell.xib; sourceTree = "<group>"; };
 		E042F74224529B7B00CDFA12 /* JiTuoWuXinXiView.swift */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.swift; path = JiTuoWuXinXiView.swift; sourceTree = "<group>"; };
 		E042F74424529B8500CDFA12 /* JiTuoWuXinXiView.xib */ = {isa = PBXFileReference; lastKnownFileType = file.xib; path = JiTuoWuXinXiView.xib; sourceTree = "<group>"; };
+		E048C19A25CBA0470008296F /* ReliableBurstData.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = ReliableBurstData.h; sourceTree = "<group>"; };
+		E048C19B25CBA0470008296F /* DeviceInfo.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = DeviceInfo.h; sourceTree = "<group>"; };
+		E048C19C25CBA0470008296F /* EscCommand.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = EscCommand.h; sourceTree = "<group>"; };
+		E048C19D25CBA0470008296F /* CBController.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = CBController.h; sourceTree = "<group>"; };
+		E048C19E25CBA0470008296F /* MyPeripheral.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = MyPeripheral.h; sourceTree = "<group>"; };
+		E048C19F25CBA0470008296F /* TscCommand.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = TscCommand.h; sourceTree = "<group>"; };
+		E048C1A025CBA0470008296F /* BLKWrite.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; path = BLKWrite.h; sourceTree = "<group>"; };
+		E048C1A125CBA0470008296F /* libGSDK.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; path = libGSDK.a; sourceTree = "<group>"; };
 		E0516F752448003D00E373CE /* PayViewController.swift */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.swift; path = PayViewController.swift; sourceTree = "<group>"; };
 		E0516F762448003D00E373CE /* PayViewController.xib */ = {isa = PBXFileReference; lastKnownFileType = file.xib; path = PayViewController.xib; sourceTree = "<group>"; };
 		E0516F7E244806C500E373CE /* MsgCenterViewController.swift */ = {isa = PBXFileReference; lastKnownFileType = sourcecode.swift; path = MsgCenterViewController.swift; sourceTree = "<group>"; };
@@ -1487,6 +1496,7 @@
 				E09B3AE324B3011B00E3B238 /* libz.1.2.5.tbd in Frameworks */,
 				E0707DC72462457200E039A8 /* libz.tbd in Frameworks */,
 				E09B3AE024B2FE0200E3B238 /* libicucore.tbd in Frameworks */,
+				E048C1A225CBA0480008296F /* libGSDK.a in Frameworks */,
 				E039848C2468F27800DFA56F /* libsqlite3.tbd in Frameworks */,
 				E09B3ADE24B2FDC600E3B238 /* JavaScriptCore.framework in Frameworks */,
 				E0AA7F362589A8AA0099193F /* jpush-ios-3.4.0.a in Frameworks */,
@@ -1928,6 +1938,29 @@
 			path = "下运单";
 			sourceTree = "<group>";
 		};
+		E048C19825CBA0470008296F /* GprinterSDKforIOS_v1.0.8 */ = {
+			isa = PBXGroup;
+			children = (
+				E048C19925CBA0470008296F /* include */,
+				E048C1A125CBA0470008296F /* libGSDK.a */,
+			);
+			path = GprinterSDKforIOS_v1.0.8;
+			sourceTree = "<group>";
+		};
+		E048C19925CBA0470008296F /* include */ = {
+			isa = PBXGroup;
+			children = (
+				E048C19A25CBA0470008296F /* ReliableBurstData.h */,
+				E048C19B25CBA0470008296F /* DeviceInfo.h */,
+				E048C19C25CBA0470008296F /* EscCommand.h */,
+				E048C19D25CBA0470008296F /* CBController.h */,
+				E048C19E25CBA0470008296F /* MyPeripheral.h */,
+				E048C19F25CBA0470008296F /* TscCommand.h */,
+				E048C1A025CBA0470008296F /* BLKWrite.h */,
+			);
+			path = include;
+			sourceTree = "<group>";
+		};
 		E04DFF092490695A002A6931 /* 采购单详情 */ = {
 			isa = PBXGroup;
 			children = (
@@ -2312,6 +2345,7 @@
 		E09B3AB624B2FCAF00E3B238 /* SDK */ = {
 			isa = PBXGroup;
 			children = (
+				E048C19825CBA0470008296F /* GprinterSDKforIOS_v1.0.8 */,
 				E09B3AB724B2FCAF00E3B238 /* ShareSDK */,
 				E09B3ACD24B2FCAF00E3B238 /* Required */,
 			);
@@ -4481,6 +4515,7 @@
 				DEFINES_MODULE = NO;
 				DEVELOPMENT_ASSET_PATHS = "\"GeliBusinessPlatform/Preview Content\"";
 				DEVELOPMENT_TEAM = K48346UACH;
+				ENABLE_BITCODE = NO;
 				ENABLE_PREVIEWS = YES;
 				FRAMEWORK_SEARCH_PATHS = (
 					"$(inherited)",
@@ -4527,6 +4562,7 @@
 					"$(PROJECT_DIR)/GeliBusinessPlatform/Other/JPush/Lib",
 					"$(PROJECT_DIR)/GeliBusinessPlatform/Other/SDK/ShareSDK/Support/PlatformSDK/WeChatSDK",
 					"$(PROJECT_DIR)/GeliBusinessPlatform/Other/SDK/GPrinter",
+					"$(PROJECT_DIR)/GeliBusinessPlatform/Other/SDK/GprinterSDKforIOS_v1.0.8",
 				);
 				MARKETING_VERSION = 1.7.2;
 				OTHER_LDFLAGS = (
@@ -4613,6 +4649,7 @@
 				DEFINES_MODULE = NO;
 				DEVELOPMENT_ASSET_PATHS = "\"GeliBusinessPlatform/Preview Content\"";
 				DEVELOPMENT_TEAM = K48346UACH;
+				ENABLE_BITCODE = NO;
 				ENABLE_PREVIEWS = YES;
 				FRAMEWORK_SEARCH_PATHS = (
 					"$(inherited)",
@@ -4659,6 +4696,7 @@
 					"$(PROJECT_DIR)/GeliBusinessPlatform/Other/JPush/Lib",
 					"$(PROJECT_DIR)/GeliBusinessPlatform/Other/SDK/ShareSDK/Support/PlatformSDK/WeChatSDK",
 					"$(PROJECT_DIR)/GeliBusinessPlatform/Other/SDK/GPrinter",
+					"$(PROJECT_DIR)/GeliBusinessPlatform/Other/SDK/GprinterSDKforIOS_v1.0.8",
 				);
 				MARKETING_VERSION = 1.7.2;
 				OTHER_LDFLAGS = (

GeliBusinessPlatform/Other/SDK/GprinterSDKforIOS_v1.0.8/include/BLKWrite.h

+//
+//  BLKWrite.h
+//  Gprinter
+//
+//  Created by Wind on 14/12/20.
+//  Copyright (c) 2014年 JiaBo. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import "MyPeripheral.h"
+
+/*
+ 调用Wi-Fi模式
+    1 [BLKWrite Instance].bWiFiMode = YES
+    2 [BLKWrite Instance] 设置ServerIP、port
+    3 [[BLKWrite Instance] initWiFiClient];
+    4 TSC：-(void) writeTscData:(NSData*) data withResponse;
+    5 ESC：-(void) writeEscData:(NSData*) data withResponse;
+ 
+ 获取打印机纸张宽度
+    1 校验后
+    2[[BLKWrite Instance] PrintWidth];
+ 
+ */
+
+
+@interface BLKWrite : NSObject<MyPeripheralDelegate>
+
+@property (nonatomic, strong) MyPeripheral *connectedPeripheral;
+@property (nonatomic, assign) BOOL bWiFiMode; //YES: Wi-Fi模式；NO：蓝牙模式
+@property (nonatomic, strong) NSString *serverIP;
+@property (nonatomic, assign) int port;
+
+
++(BLKWrite*) Instance;
+
+-(void) writeTscData:(NSData*) data withResponse:(BOOL) flag;
+-(void) writeEscData:(NSData*) data withResponse:(BOOL) flag;
+-(BOOL) isConnecting;
+
+-(void) setPeripheral:(MyPeripheral*) peripheral;
+
+#pragma mark-Wi-Fi Mode
+-(void) initWiFiClient;
+
+#pragma mark-
+
+-(int) PrintWidth;
+
+@end

GeliBusinessPlatform/Other/SDK/GprinterSDKforIOS_v1.0.8/include/CBController.h

+//
+//  CBController.h
+//  BLETR
+//
+//  Created by user D500 on 12/2/15.
+//  Copyright (c) 2012年 __MyCompanyName__. All rights reserved.
+//
+
+#import <UIKit/UIKit.h>
+#import <CoreBluetooth/CoreBluetooth.h>
+#import "MyPeripheral.h"
+
+enum {
+    LE_STATUS_IDLE = 0,
+    LE_STATUS_SCANNING,
+    LE_STATUS_CONNECTING,
+    LE_STATUS_CONNECTED
+};
+
+
+@interface MultiDevice : NSObject
+@property(nonatomic, assign) NSInteger index;//0：ISSC；1：红果
+@property(nonatomic, assign) BOOL connected;//是否已经连接
+@end
+
+
+@protocol CBControllerDelegate;
+@interface CBController : UIViewController<CBCentralManagerDelegate, CBPeripheralDelegate,ReliableBurstDataDelegate>
+{
+    CBCentralManager *manager;
+    NSMutableArray *devicesList;
+    BOOL    notifyState;
+    NSMutableArray *_connectedPeripheralList;
+    CBUUID *_transServiceUUID;
+    CBUUID *_transTxUUID;
+    CBUUID *_transRxUUID;
+    CBUUID *_disUUID1;
+    CBUUID *_disUUID2;
+    BOOL    isISSCPeripheral;
+}
+
+@property(assign) id<CBControllerDelegate> delegate;
+@property (retain) NSMutableArray *devicesList;
+
+- (void) startScan;
+- (void) stopScan;
+- (void)connectDevice:(MyPeripheral *) myPeripheral;
+- (void)disconnectDevice:(MyPeripheral *) aPeripheral;
+- (NSMutableData *) hexStrToData: (NSString *)hexStr;
+- (BOOL) isLECapableHardware;
+- (void)addDiscoverPeripheral:(CBPeripheral *)aPeripheral advName:(NSString *)advName;
+- (void)updateDiscoverPeripherals;
+- (void)updateMyPeripheralForDisconnect:(MyPeripheral *)myPeripheral;
+- (void)updateMyPeripheralForNewConnected:(MyPeripheral *)myPeripheral;
+- (void)storeMyPeripheral: (CBPeripheral *)aPeripheral;
+- (MyPeripheral *)retrieveMyPeripheral: (CBPeripheral *)aPeripheral;
+- (void)removeMyPeripheral: (CBPeripheral *) aPeripheral;
+- (void)configureTransparentServiceUUID: (NSString *)serviceUUID txUUID:(NSString *)txUUID rxUUID:(NSString *)rxUUID;
+- (void)configureDeviceInformationServiceUUID: (NSString *)UUID1 UUID2:(NSString *)UUID2;
+@end
+
+@protocol CBControllerDelegate
+@required
+- (void)didUpdatePeripheralList:(NSArray *)peripherals;
+- (void)didConnectPeripheral:(MyPeripheral *)peripheral;
+- (void)didDisconnectPeripheral:(MyPeripheral *)peripheral;
+@end
\ No newline at end of file

GeliBusinessPlatform/Other/SDK/GprinterSDKforIOS_v1.0.8/include/DeviceInfo.h

+//
+//  DeviceInfo.h
+//  BLETR
+//
+//  Created by d500_MacMini on 13/6/19.
+//  Copyright (c) 2013年 ISSC. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import "CBController.h"
+
+@interface DeviceInfo : NSObject
+
+@property(retain) MyPeripheral *myPeripheral;
+//@property(retain) ViewController *mainViewController;
+
+@end

GeliBusinessPlatform/Other/SDK/GprinterSDKforIOS_v1.0.8/include/EscCommand.h

+//
+//  EscCommand.h
+//  Gprinter
+//
+//  Created by Wind on 14/12/22.
+//  Copyright (c) 2014年 JiaBo. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+@interface EscCommand : NSObject
+
+@property(nonatomic, assign) BOOL hasResponse;
+
+/**
+ * 方法说明：打印UPCA条码
+ * @param content 数据范围0-9，长度为11位
+ */
+-(void) addUPCAtest:(NSString*) content;
+
+/**
+ * 方法说明：插入文字
+ * @param text
+ */
+-(void) addText:(NSString*) text;
+
+/**
+ * 方法说明:获得打印命令
+ * @return NSData*
+ */
+-(NSData*) getCommand;
+
+/**
+ * 方法说明：将字符串转成十六进制码
+ * @param  str  命令字符串
+ * @return void
+ */
+-(void) addStrToCommand:(NSString *) str;
+
+/**
+ * 方法说明：打印机初始化，必须是第一个打印命令0x1b,0x40
+ */
+-(void) addInitializePrinter;
+
+/**
+ * 方法说明：打印并且走纸多少行，默认为8行，打印完内容后发送
+ * @param n 行数
+ */
+-(void) addPrintAndFeedLines:(int) n;
+
+/**
+ * 方法说明：设置打印模式，0x1B 0x21 n(0-255)，根据n的值设置字符打印模式
+ * @param font     选择FONTA or FONTB
+ * @param emphasized    是否加粗
+ * @param doubleheight  是否倍高，当倍宽和倍高模式同时选择时，字符同时在横向和纵向放大两倍。
+ * @param doublewidth   是否倍宽
+ * @param underline     是否下划线
+	*参数n二进制默认为00000000(0X0),10001000(0X88)表示下划线和加粗，00001000(0X08)表示加粗，10000000(0X80)表示下划线
+ */
+-(void) addPrintMode:(int) n;
+/**
+ * 方法说明：设置国际字符集，默认为美国0
+ * @param set 字符集编号
+ */
+-(void) addSetInternationalCharacterSet:(int) n;
+/**
+ * 方法说明：设置字符是否旋转90°，默认为0
+ * @param enabel 是否旋转
+ */
+-(void) addSet90ClockWiseRotatin:(int) n;
+
+/**
+ * 方法说明：设置对齐方式
+ * @param n 左 中 右对齐，0左对齐,1中间对齐,2右对齐
+ */
+-(void) addSetJustification:(int) n;
+
+/**
+ * 方法说明：开钱箱
+ * @param m  钱箱引脚号
+ * @param t1          高电平时间
+ * @param t2          低电平时间
+ */
+-(void) addOpenCashDawer:(int) m :(int) t1 :(int) t2;
+
+/**
+ * 方法说明：蜂鸣器
+ * @param m  报警灯和鸣叫次数
+ * @param t  时间
+ * @param n  方式
+ */
+-(void) addSound:(int) m :(int) t :(int) n;
+
+/**
+ * 方法说明：设置行间距，不用设置，打印机默认为30
+ * @param n  行间距高度，包含文字
+ */
+-(void) addLineSpacing:(int) n;
+
+/**
+ * 方法说明：设置倒置模式 选择/取消倒置打印模式。
+ * @param enable  是否倒置，默认为0， 0 ≤n ≤255 当n的最低位为0时，取消倒置打印模式。当n的最低位为1时，选择倒置打印模式。只有n的最低位有效；
+ */
+-(void) addSetUpsideDownMode:(int) n;
+
+/**
+ * 方法说明：设置字符放大，限制为不放大和放大2倍，n=0x11
+ * @param n= width | height 宽度放大倍数，0 ≤n ≤255 （1 ≤ 纵向放大倍数 ≤8，1 ≤ 横向放达倍数 ≤8）[描述]   用0 到2 位选择字符高度，4 到7 位选择字符宽度
+ */
+-(void) addSetCharcterSize:(int) n;
+
+/**
+ * 方法说明：设置反白模式，黑白反显打印模式
+ * @param enable  是否反白，当n的最低位为0时，取消反显打印模式。当n的最低位为1时，选择反显打印模式。只有n的最低位有效；
+ */
+-(void) addSetReverseMode:(int) n;
+
+
+/**
+ * 方法说明：打印机实时状态请求
+ * @param status  PRINTER_STATUS  打印机状态 1 ≤n ≤4
+ *                PRINTER_OFFLINE 脱机状态
+ *                PRINTER_ERROR   错误状态
+ *                PRINTER_PAPER   纸张状态
+ */
+-(void) queryRealtimeStatus:(int) n;
+
+/**
+ * 方法说明：设置切纸后走纸
+ * @param length  走纸距离
+ */
+-(void) addCutPaperAndFeed:(int) n;
+
+/**
+ * 方法说明：切纸 0全切纸，1是半切
+ */
+-(void) addCutPaper:(int) m;
+/**
+ * 方法说明：设置条码可识别字符，选择HRI字符的打印位置
+ * @param n  可识别字符位置，0, 48  不打印 1, 49  条码上方 2, 50  条码下方 3, 51  条码上、下方都打印
+ */
+-(void) addSetBarcodeHRPosition:(int) n;
+
+/**
+ * 方法说明：设置条码字符种类，选择HRI使用字体
+ * @param n 固定为0 0,48  标准ASCII码字符 (12 × 24)  1,49  压缩ASCII码字符 (9 × 17)
+ */
+-(void) addSetBarcodeHRIFont;
+/**
+ * 方法说明：设置条码高度
+ * @param n 高度 条码高度为n点，默认为40
+ */
+-(void) addSetBarcodeHeight:(int) n;
+
+/**
+ * 方法说明：设置条码单元宽度，不用设置，使用打印机内部默认值
+ * @param n 条码宽度 2 ≤n ≤6
+ */
+-(void) addSetBarcodeWidth:(int) n;
+
+/**
+ * 方法说明：打印EAN13码
+ * @param content 数据范围0-9，长度为12位
+ */
+-(void) addEAN13:(NSString*) content;
+
+/**
+ * 方法说明：打印EAN8码
+ * @param content 数据范围0-9，长度为7位
+ */
+-(void) addEAN8:(NSString*) content;
+
+/**
+ * 方法说明：打印UPCA条码
+ * @param content 数据范围0-9，长度为11位
+ */
+-(void) addUPCA:(NSString*) content;
+
+/**
+ * 方法说明:打印ITF14条码
+ * @param content 数据范围 0-9   数据长度   偶数个
+ */
+-(void) addITF:(NSString*) content;
+
+/**
+ * 方法说明:打印CODE39条码
+ * @param content  数据范围0-9 A-Z SP $ % + - . / ，*为 (开始/结束字符)
+ */
+-(void) addCODE39:(NSString*) content;
+
+
+/**
+ * 方法说明：打印CODE128码
+ * 采用的是1D 6B 49 n的命令格式，n为后面所有打印字符串的长度，包括了字符集的声明。默认使用CODEB字符集:  {B , 0x7B, 0x42
+ * @param charset  ,CODEB字符集有 {A  {B  {C，charset默认值用B ，实际上，字符集可以插入到content中，一个content可以有多个字符集定义。
+ * @param content 数据范围0x00-0x7f
+ */
+-(void) addCODE128:(char) charset :(NSString*) content;
+
+/**
+ * 方法说明：打印CODE128码支持混合{A {B {C打印，支持58mm纸打印超过14位的奇数数字，例如15位 17位 19位的数字串
+ * 采用的是1D 6B 49 n的命令格式，n为后面所有打印字符串的长度，包括了字符集的声明。默认使用CODEB字符集:  {B , 0x7B, 0x42
+ * CODEB字符集有 {A  {B  {C，默认值用B ，实际上，字符集可以插入到data中，一个data可以有多个字符集定义。
+ * @param height 条码高度 
+ * @param width 条码宽度 
+ * @param data 数据范围0x00-0x7f，全部为16进制
+ */
+-(void) addCODE128ABC:(int) height :(int) width :(NSData*) data;
+
+
+/**
+ * 方法说明：addNVLOGO
+ * @param n为序号，1<=n<=20 m默认为0
+ */
+-(void) addNVLOGO:(int) n :(int) m;
+
+/*
+ 十六进制码 1D 76 30 m xL xH yL yH d1...dk
+ 0 ≤ m ≤ 3, 48 ≤ m ≤ 51
+ 0 ≤ xL ≤ 255
+ 0 ≤ xH ≤ 255
+ 0 ≤ yL ≤ 255
+ 0 ≤ yH ≤ 255
+ 0 ≤ d ≤ 255
+ k = ( xL + xH × 256) × ( yL + yH × 256) ( k ≠ 0)
+ 参 数 说 明
+ m 模式
+ 0, 48 正常
+ 1, 49 倍宽
+ 2, 50 倍高
+ 3, 51 倍宽、倍高
+ xL、 xH表示水平方向位图字节数（ xL+ xH × 256）
+ yL、 yH表示垂直方向位图点数（  yL+ yH × 256） 
+ data 影像数据
+ */
+-(void) addESCBitmapwithM:(int) m withxL:(int) xL withxH:(int) xH withyL:(int) yL
+            withyH:(int) yH withData:(NSData*) data;
+
+/*
+ 正确的ESC指令下QRCode打印流程为四步：
+ 1、设定QRCode大小；（可以省略）
+ 2、设定纠错等级；（一般无需设定，忽略）
+ 3、将QRCode对应的文字信息存入打印机缓存中；（必须要有）
+ 4、发送打印QRCode命令。
+ 一共有四个命令对应上述四步。
+*/
+/*
+ 1、设定QRCode大小；（可以省略）
+ [格式] ASCII码 GS ( K pL pH cn fn n
+ 十六进制码 1D 28 6B 03 00 31 43 n
+ [范围] (pL+pH×256)=3 (pL=3,pH=0)
+ cn=49
+ fn=67
+ 1 ≤n≤16
+ [默认值] n=3
+*/
+-(void) addQRCodeSizewithpL:(int) pL withpH:(int) pH withcn:(int) cn
+            withyfn:(int) fn withn:(int) n;
+
+/*
+ 2、设定纠错等级；（一般无需设定，忽略）
+ [格式] ASCII码 GS ( K pL pH cn fn m d1...dk
+ 十六进制码 1D 28 6B 03 00 31 45 n
+ [范围] (pL+pH×256)=3 (pL=3,pH=0)
+ cn=49
+ fn=69
+ 48≤n≤51
+ [默认值] n=48
+*/
+-(void) addQRCodeLevelwithpL:(int) pL withpH:(int) pH withcn:(int) cn
+            withyfn:(int) fn withn:(int) n;
+			
+/*
+ 3、将QRCode对应的文字信息存入打印机缓存中；（必须要有）
+ [格式] ASCII码 GS ( K pL pH cn fn m d1...dk
+ 十六进制码 1D 28 6B pL pH 31 50 30 d1...dk
+ [范围] 4≤(pL+pH×256)≤7092 (0≤pL≤255,0≤pH≤27)
+ cn=49
+ fn=80
+ m=48
+ k=(pL+pH×256)-3
+ [描述] 存储QR CODE数据（d1...dk)到符号存储区
+ [注释] • 将QRCode的数据存储到打印机中
+ • 执行esc @或打印机掉电后，恢复默认值
+*/
+-(void) addQRCodeSavewithpL:(int) pL withpH:(int) pH withcn:(int) cn
+            withyfn:(int) fn withm:(int) m withData:(NSData*) data;
+
+/*
+ 4、发送打印QRCode命令。
+ [格式] ASCII码 GS ( K pL pH cn fn m
+ 十六进制码 1D 28 6B 03 00 31 51 m
+ [范围] (pL+pH×256)=3 (pL=3,pH=0)
+ cn=49
+ fn=81
+ m=48
+ [描述] 打印QRCode条码，在发送此命令之前，需通过（ K< Function 180）命令将QRCode数据存储在打印机中。
+*/
+-(void) addQRCodePrintwithpL:(int) pL withpH:(int) pH withcn:(int) cn
+            withyfn:(int) fn withm:(int) m;
+
+/**
+* 方法说明：设置是否汉字字体
+* @param n  是否倍宽 是否倍高 是否下划线
+*/
+-(void) addSetKanjiFontMode:(int) n;
+
+/**
+* 方法说明：设置汉字有效
+*/
+-(void) addSelectKanjiMode;
+
+/**
+* 方法说明：设置汉字下划线
+* @param n 根据 n 的值，选择或取消汉字的下划线：
+* n     功能
+* 0, 48 取消汉字下划线
+* 1, 49 选择汉字下划线（1 点宽）
+* 2, 50 选择汉字下划线（2点宽）
+*/
+-(void)addSetKanjiUnderLine:(int) n;
+
+/**
+* 方法说明：设置汉字无效
+*/
+-(void) addCancelKanjiMode;
+
+/**
+* 方法说明：设置字符右间距
+* @param  n  间距长度
+* 0 ≤ n≤255
+* [描述] 设置字符的右间距为[n×横向移动单位或纵向移动单位]英寸。
+* [注释] • 当字符放大时，右间距随之放大相同的倍数。
+* • 此命令设置的值在页模式和标准模式下是相互独立的。
+* • 横向或纵向移动单位由GS P指定。改变横向或纵向移动单位不改变当前右间距。
+* • GS P 命令可改变水平（和垂直）运动单位。但是该值不得小于最小水平移动量，
+* 并且必须为最小水平移动量的偶数单位。
+* • 标准模式下，使用横向移动单位。
+* • 最大右间距是31 .91 毫米（255/203 英寸） 。 任何超过这个值的设置都自动转换为最
+* 大右间距。
+* [默认值] n = 0
+*/
+-(void) addSetCharacterRightSpace:(int) n;
+
+/**
+* 方法说明：设置汉字左右间距
+* @param n1  左间距 0 ≤ n1 ≤ 255
+* @param n2 右间距 0 ≤ n2 ≤ 255
+*/
+-(void) addSetKanjiLefttandRightSpace:(int) n1 :(int) n2;
+
+
+/**
+* 方法说明：设置加粗模式
+* @param n  是否加粗
+* 0 ≤ n ≤ 255
+* [描述] 选择或取消加粗模式
+* 当n的最低位为0时，取消加粗模式。
+* 当n的最低位为1 时，选择加粗模式。
+* [注释] • n只有最低位有效。
+* • ESC ! 同样可以选择/取消加粗模式，最后接收的命令有效。
+* [默认值] n = 0
+*/
+-(void) addTurnEmphasizedModeOnOrOff:(int) n;
+
+/**
+* 方法说明：设置加重模式
+* @param n  是否加重
+* 0 ≤ n ≤ 255
+* [描述] 选择/取消双重打印模式。
+* • 当n的最低位为0时，取消双重打印模式。
+* • 当n的最低位为1 时，选择双重打印模式。
+* [注释] • n只有最低位有效。
+* • 该命令与加粗打印效果相同。
+* [默认值] n = 0
+*/
+-(void) addTurnDoubleStrikeOnOrOff:(int) n;
+
+/**
+* 方法说明：发送16进制数据，例如data=0x0A或data=0x0D
+*/
+-(void) addNSDataToCommand:(NSData*) data;
+
+@end
\ No newline at end of file

GeliBusinessPlatform/Other/SDK/GprinterSDKforIOS_v1.0.8/include/MyPeripheral.h

+//
+//  MyPeripheral.h
+//  BLETR
+//
+//  Created by D500 user on 13/5/30.
+//  Copyright (c) 2013年 ISSC. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+#import <CoreBluetooth/CoreBluetooth.h>
+#import "ReliableBurstData.h"
+
+#define AIR_PATCH_COMMAND_VENDOR_MP_ENABLE      0x03
+#define AIR_PATCH_COMMAND_XMEMOTY_READ          0x08
+#define AIR_PATCH_COMMAND_XMEMOTY_WRITE         0x09
+#define AIR_PATCH_COMMAND_E2PROM_READ           0x0a
+#define AIR_PATCH_COMMAND_E2PROM_WRITE          0x0b
+#define AIR_PATCH_COMMAND_READ                  0x24
+
+#define AIR_PATCH_SUCCESS   0x00
+
+#define AIR_PATCH_ACTION_CHANGE_DEVICE_NAME     0X01
+#define AIR_PATCH_ACTION_READ_ADVERTISE_DATA1   0X02
+#define AIR_PATCH_ACTION_READ_ADVERTISE_DATA2   0X03
+#define AIR_PATCH_ACTION_UPDATE_ADVERTISE_DATA  0X04
+#define AIR_PATCH_ACTION_CHANGE_DEVICE_NAME_MEMORY     0X05
+#define AIR_PATCH_ACTION_READ                   0X24
+
+#define ADVERTISE_DATA_TYPE_COMPLETE_DEVICE_NAME 0X09
+#define ADVERTISE_DATA_TYPE_SHORTEN_DEVICE_NAME  0X08
+
+enum {
+    MYPERIPHERAL_CONNECT_STATUS_IDLE = 0,
+    MYPERIPHERAL_CONNECT_STATUS_CONNECTING,
+    MYPERIPHERAL_CONNECT_STATUS_CONNECTED,
+};
+
+enum {
+    UPDATE_PARAMETERS_STEP_PREPARE = 0,
+    UPDATE_PARAMETERS_STEP_CHECK_RESULT,
+};
+typedef struct _AIR_PATCH_COMMAND_FORMAT
+{
+    unsigned char commandID;
+    char parameters[19];
+}__attribute__((packed)) AIR_PATCH_COMMAND_FORMAT;
+
+typedef struct _AIR_PATCH_EVENT_FORMAT
+{
+    char    status;
+    unsigned char commandID;
+    char parameters[16];
+}__attribute__((packed)) AIR_PATCH_EVENT_FORMAT;
+
+
+typedef struct _WRITE_EEPROM_COMMAND_FORMAT
+{
+    unsigned char addr[2];
+    unsigned char length;
+    char    data[16];
+}__attribute__((packed)) WRITE_EEPROM_COMMAND_FORMAT;
+
+typedef struct _CONNECTION_PARAMETER_FORMAT
+{
+    unsigned char status;
+    unsigned short minInterval;
+    unsigned short maxInterval;
+    unsigned short latency;
+    unsigned short connectionTimeout;
+}__attribute__((packed)) CONNECTION_PARAMETER_FORMAT;
+
+
+@protocol MyPeripheralDelegate;
+@interface MyPeripheral : NSObject
+{
+@private
+    char    advData[25];
+    char    deviceName[16];
+    NSMutableArray *queuedTask;
+}
+@property(assign) id<MyPeripheralDelegate> transDataDelegate;
+@property(assign) id<MyPeripheralDelegate> proprietaryDelegate;
+@property(assign) id<MyPeripheralDelegate> deviceInfoDelegate;
+
+@property (retain) CBPeripheral *peripheral;
+@property(copy) NSString *advName;
+@property(assign) uint8_t connectStaus;
+@property (assign) BOOL canSendData;
+
+//DIS
+@property(retain) CBCharacteristic *manufactureNameChar;
+@property(retain) CBCharacteristic *modelNumberChar;
+@property(retain) CBCharacteristic *serialNumberChar;
+@property(retain) CBCharacteristic *hardwareRevisionChar;
+@property(retain) CBCharacteristic *firmwareRevisionChar;
+@property(retain) CBCharacteristic *softwareRevisionChar;
+@property(retain) CBCharacteristic *systemIDChar;
+@property(retain) CBCharacteristic *certDataListChar;
+@property(retain) CBCharacteristic *specificChar1;
+@property(retain) CBCharacteristic *specificChar2;
+
+//Proprietary
+@property(retain) CBCharacteristic *airPatchChar;
+@property(retain) CBCharacteristic *transparentDataWriteChar;
+@property(retain) CBCharacteristic *transparentDataReadChar;
+@property(retain) CBCharacteristic *connectionParameterChar;
+@property(assign) uint8_t   updateConnectionParameterStep;
+@property(readonly) ReliableBurstData *transmit;
+
+@property(assign) CONNECTION_PARAMETER_FORMAT connectionParameter;
+@property(assign) CONNECTION_PARAMETER_FORMAT backupConnectionParameter;
+
+
+@property(assign) BOOL    vendorMPEnable;
+@property(assign) short   airPatchAction;
+@property(assign) BOOL    isNotifying;
+
+
+- (CONNECTION_PARAMETER_FORMAT *)retrieveBackupConnectionParameter;
+- (void)updateBackupConnectionParameter:(CONNECTION_PARAMETER_FORMAT *)parameter;
+- (BOOL)compareBackupConnectionParameter:(CONNECTION_PARAMETER_FORMAT *)parameter;
+
+- (void)checkConnectionParameterStatus;
+- (void)sendVendorMPEnable;
+- (void)updateAirPatchEvent: (NSData *)returnEvent;
+- (void)writeE2promValue: (short)address length:(short)length data:(char *)data;
+- (void)readE2promValue: (short)address length:(short)length;
+- (void)writeMemoryValue: (short)address length:(short)length data:(char *)data;
+- (void)readMemoryValue: (short)address length:(short)length;
+- (CBCharacteristicWriteType)sendTransparentData:(NSData *)data type:(CBCharacteristicWriteType)type;
+- (void)setTransDataNotification:(BOOL)notify;
+
+- (NSError *)setMaxConnectionInterval:(unsigned short)maxInterval connectionTimeout:(unsigned short)connectionTimeout connectionLatency:(unsigned short)connectionLatency;
+- (void)checkIsAllowUpdateConnectionParameter;
+- (void)changePeripheralName: (NSString *)name;
+
+- (void)readManufactureName;
+- (void)readModelNumber;
+- (void)readSerialNumber;
+- (void)readHardwareRevision;
+- (void)readFirmwareRevision;
+- (void)readSoftwareRevison;
+- (void)readSystemID;
+- (void)readCertificationData;
+- (void)readSpecificUUID1;
+- (void)readSpecificUUID2;
+
+@end
+
+
+@protocol MyPeripheralDelegate<NSObject>
+@optional
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateConnectionParameterAllowStatus:(BOOL)status;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateConnectionParameterStatus:(BOOL)status interval:(unsigned short)interval timeout:(unsigned short)timeout  latency:(unsigned short)latency;
+
+- (void)MyPeripheral:(MyPeripheral *)peripheral didChangePeripheralName:(NSError *)error;
+
+- (void)MyPeripheral:(MyPeripheral *)peripheral didReceiveTransparentData:(NSData *)data;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didReceiveMemoryAddress:(NSData *)address length:(short)length data:(NSData *)data;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didWriteMemoryAddress:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didSendTransparentDataStatus:(NSError *) error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateTransDataNotifyStatus:(BOOL)notify;
+
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateManufactureName:(NSString *)name error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateModelNumber:(NSString *)modelNumber error:(NSError *)error;
+
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateSerialNumber:(NSString *)serialNumber error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateHardwareRevision:(NSString *)hardwareRevision error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateFirmwareRevision:(NSString *)firmwareRevision error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateSoftwareRevision:(NSString *)softwareRevision error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateSystemId:(NSData *)systemId error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateIEEE_11073_20601:(NSData *)IEEE_11073_20601 error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateSpecificUUID1:(NSData *)value error:(NSError *)error;
+- (void)MyPeripheral:(MyPeripheral *)peripheral didUpdateSpecificUUID2:(NSData *)value error:(NSError *)error;
+@end

GeliBusinessPlatform/Other/SDK/GprinterSDKforIOS_v1.0.8/include/ReliableBurstData.h

+//
+//  ReliableBurstData.h
+//  ReliableBurstData
+//
+//  Created by Rick on 14/2/19.
+//  Copyright (c) 2014 ISSC Technologies Corporation. All rights reserved.
+//
+
+/*!
+ *	@file ReliableBurstData.h
+ *	@framework ReliableBurstData
+ *
+ *  @discussion Entry point to the ReliableBurstTransmit.
+ *
+ *	@copyright 2014 ISSC Technologies Corporation. All rights reserved.
+ */
+
+#import <Foundation/Foundation.h>
+#import <CoreBluetooth/CoreBluetooth.h>
+
+@protocol ReliableBurstDataDelegate;
+@interface ReliableBurstData : NSObject
+
+/*!
+ *  @method                 				transmitSize
+ *
+ *  @return                 				Max package size to transmit
+ */
+- (NSUInteger)transmitSize;
+
+/*!
+ *  @method                                 reliableBurstTransmit:withTransparentCharacteristic:
+ *
+ *  @discussion                             Send reliableBurstTransmit with special characteristic
+ *
+ *  @param data                             Data to transmit
+ *  @param transparentDataWriteChar         Characteristic to transmit
+ */
+- (void)reliableBurstTransmit:(NSData *)data withTransparentCharacteristic:(CBCharacteristic *)transparentDataWriteChar;
+
+/*!
+ *  @method canSendReliableBurstTransmit
+ *  
+ *  @return                                 YES if the data can be sent, or NO if the transmission queue is full. If NO was returned,
+ *     										wait for it return YES to send new data.
+ */
+- (BOOL)canSendReliableBurstTransmit;
+
+/*!
+ *
+ *
+ *  @return                                 YES if the accessory can disconnect now, or NO if the transmission is busy.
+ *                                          If NO was returned, wait for it return YES to disconnect.
+ *  @discussion
+ *  For example:
+ *              int count = 0;
+                while (![reliableBurstData canDisconnect]) {
+                    sleep(1);
+                    count++;
+                    if (count >= 10) {
+                        break;
+                    }
+                }
+                dispatch_async(dispatch_get_main_queue(), ^{
+                    [manager cancelPeripheralConnection:peripheral];
+                });
+ */
+- (BOOL)canDisconnect;
+
+/*!
+ *  @method                                 decodeReliableBurstTransmitEvent:
+ *
+ *  @param eventData                        The eventData need to decode for reliableBurstTransmit
+ *
+ *  @discussion                             This method decodes the events of reliable burst transmition, it should parse all the values
+ *                                          of air patch characteristic first when receiving notifications.
+ *  For example:
+ *  - (void)updateAirPatchEvent: (NSData *)returnEvent {
+        [reliableBurstData decodeReliableBurstTransmitEvent:returnEvent];
+        ...
+    }
+ */
+- (void)decodeReliableBurstTransmitEvent:(NSData *)eventData;
+
+/*!
+ *  @method                                 enableReliableBurstTransmit:andAirPatchCharacteristic:
+ *
+ *  @param peripheral                       CBPeripheral to enable ReliableBurstTransmit
+ *  @param airPatchCharacteristic           CBCharacteristic with airPatch characteristic
+ *
+ *  @discussion                             Ues this method to enable ReliableBurstTransmit.
+ *                                          This method have to be called before sending data.
+ *  
+ *  For example:
+ *  - (void) peripheral:(CBPeripheral *)aPeripheral didDiscoverCharacteristicsForService:(CBService *)service error:(NSError *)error {
+        if ([service.UUID isEqual:[CBUUID UUIDWithString:UUIDSTR_ISSC_PROPRIETARY_SERVICE]])
+            for (aChar in service.characteristics)
+            {
+                if ([aChar.UUID isEqual:[CBUUID UUIDWithString:UUIDSTR_AIR_PATCH_CHAR]]) {
+                    [reliableBurstData enableReliableBurstTransmit:aPeripheral andAirPatchCharacteristic:aChar];
+                }
+            }
+    }
+
+ */
+- (void)enableReliableBurstTransmit:(CBPeripheral *)peripheral andAirPatchCharacteristic:(CBCharacteristic *)airPatchCharacteristic;
+
+/*!
+ *  @method                                 isReliableBurstTransmit:
+ *
+ *  @param transparentDataWriteChar         The parameter should input the CBCharacteristic object of didWriteValueForCharacteristic: delegate
+ *
+ *  @return                                 YES if writeValue:forCharacteristic:type: with CBCharacteristicWriteWithResponse type is call by ReliableBurstTransmit.
+ *
+ *  @discussion                             This library will use CBCharacteristicWriteWithResponse type when accessory doesn't
+ *                                          support ReliableBurstTransmit feature. This method informs library the data have been sent.
+ *  
+ *  For example:
+ *  - (void) peripheral:(CBPeripheral *)aPeripheral didWriteValueForCharacteristic:(CBCharacteristic *)characteristic error:(NSError *)error
+    {
+        if ([reliableBurstData isReliableBurstTransmit:characteristic]) {
+            return;
+        }
+        // Other code
+    }
+ *
+ */
+- (BOOL)isReliableBurstTransmit:(CBCharacteristic *)transparentDataWriteChar;
+
+/*!
+ *  @method                                 version
+ *
+ *  @return                                 Version number with major.minor format.
+ */
+- (NSString *)version;
+@property (nonatomic,weak)id<ReliableBurstDataDelegate>delegate;
+@end
+@protocol ReliableBurstDataDelegate <NSObject>
+
+/*!
+ *  @method                                 reliableBurstData:didSendDataWithCharacteristic:
+ *
+ *  @discussion                             This method is invoked when the data has been sent.
+ *  
+ */
+- (void)reliableBurstData:(ReliableBurstData *)reliableBurstData didSendDataWithCharacteristic:(CBCharacteristic *)transparentDataWriteChar;
+
+@end

GeliBusinessPlatform/Other/SDK/GprinterSDKforIOS_v1.0.8/include/TscCommand.h

+//
+//  TscCommand.h
+//  Gprinter
+//
+//  Created by Wind on 14/12/22.
+//  Copyright (c) 2014年 JiaBo. All rights reserved.
+//
+
+#import <Foundation/Foundation.h>
+
+@interface TscCommand : NSObject
+
+@property(nonatomic, assign) BOOL hasResponse;
+
+/**
+ * 方法说明：设置标签尺寸的宽和高
+ * @param width  标签宽度
+ * @param height 标签高度
+ * @return void
+ */
+-(void) addSize:(int) width :(int) height;
+
+/**
+ * 方法说明：设置标签间隙尺寸 单位mm
+ * @param m    间隙长度
+ * @param n    间隙偏移
+ * @return void
+ */
+-(void) addGapWithM:(int) m withN:(int) n;
+
+/**
+ * 方法说明：设置标签原点坐标
+ * @param x  横坐标
+ * @param y  纵坐标
+ * @return void
+ */
+-(void) addReference:(int) x :(int)y;
+
+/**
+ * 方法说明：设置打印速度
+ * @param speed  打印速度
+ * @return void
+ */
+-(void) addSpeed:(int) speed;
+
+/**
+ * 方法说明：设置打印浓度
+ * @param density  浓度
+ * @return void
+ */
+-(void) addDensity:(int) density;
+
+/**
+ * 方法说明：设置打印方向
+ * @param direction  方向
+ * @return void
+ */
+-(void) addDirection:(int) direction;
+
+/**
+ * 方法说明：清除打印缓冲区
+ * @return void
+ */
+-(void) addCls;
+
+/**
+ * 方法说明:在标签上绘制文字
+ * @param x 横坐标
+ * @param y 纵坐标
+ * @param font  字体类型
+ * @param rotation  旋转角度
+ * @param Xscal  横向放大
+ * @param Yscal  纵向放大
+ * @param text   文字字符串
+ * @return void
+ */
+-(void) addTextwithX:(int)x withY:(int) y withFont:(NSString*) font
+        withRotation:(int) rotation withXscal:(int) Xscal withYscal:(int) Yscal withText:(NSString*) text;
+
+/*
+ BITMAP X, Y, width, height, mode, bitmap data
+ 参 数 说 明
+ x 点阵影像的水平启始位置
+ y 点阵影像的垂直启始位置
+ width 影像的宽度，以 byte 表示
+ height 影像的高度，以点(dot)表示
+ mode 影像绘制模式
+ 0 OVERWRITE
+ 1 OR
+ 2 XOR
+ bitmap data 影像数据
+ */
+-(void) addBitmapwithX:(int)x withY:(int) y withWidth:(int) width
+            withHeight:(int) height withMode:(int) mode withData:(NSData*) data;
+
+/**
+ * 方法说明:在标签上绘制一维条码
+ * @param x 横坐标
+ * @param y 纵坐标
+ * @param barcodetype 条码类型
+ * @param height  条码高度，默认为40
+ * @param readable  是否可识别，0:  人眼不可识，1:   人眼可识
+ * @param rotation  旋转角度，条形码旋转角度，顺时钟方向，0不旋转，90顺时钟方向旋转90度，180顺时钟方向旋转180度，270顺时钟方向旋转270度
+ * @param Narrow 默认值2，窄 bar  宽度，以点(dot)表示
+ * @param Wide 默认值4，宽 bar  宽度，以点(dot)表示
+ * @param content   条码内容
+ * @return void
+ BARCODE X,Y,"code type",height,human readable,rotation,narrow,wide,"code"
+ BARCODE 100,100,"39",40,1,0,2,4,"1000"
+ BARCODE 10,10,"128",40,1,0,2,2,"124096ABCDEFZ$%+-./*"
+ "code type":
+ EAN13("EAN13"),
+ EAN8("EAN8"),
+ UPCA("UPCA"),
+ ITF14("ITF14"),
+ CODE39("39"),
+ CODE128("128"),
+ */
+-(void) add1DBarcode:(int)x :(int)y :(NSString*)barcodetype :(int)height
+                    :(int)readable :(int)rotation :(int)Narrow :(int)Wide :(NSString*)content;
+
+/**
+ * 方法说明:在标签上绘制QRCode二维码
+ * @param x 横坐标
+ * @param y 纵坐标
+ * @param ecclever 选择QRCODE纠错等级,L为7%,M为15%,Q为25%,H为30%
+ * @param cellwidth  二维码宽度1~10，默认为4
+ * @param mode  默认为A，A为Auto,M为Manual
+ * @param rotation  旋转角度，QRCode二维旋转角度，顺时钟方向，0不旋转，90顺时钟方向旋转90度，180顺时钟方向旋转180度，270顺时钟方向旋转270度
+ * @param content   条码内容
+ * @return void
+ * QRCODE X,Y ,ECC LEVER ,cell width,mode,rotation, "data string"
+ * QRCODE 20,24,L,4,A,0,"佳博集团网站www.Gprinter.com.cn"
+ */
+-(void) addQRCode:(int)x :(int)y :(NSString*)ecclever :(int)cellwidth
+                    :(NSString*)mode :(int)rotation :(NSString*)content;
+
+/**
+ * 方法说明：执行打印
+ * @param m
+ * @param n
+ * @return void
+ */
+-(void) addPrint:(int) m :(int) n;
+
+/**
+ * 方法说明:获得打印命令
+ * @return NSData*
+ */
+-(NSData*) getCommand;
+
+/**
+ * 方法说明：将字符串转成十六进制码
+ * @param  str  命令字符串
+ * @return void
+ */
+-(void) addStrToCommand:(NSString *) str;
+
+-(void) addNSDataToCommand:(NSData*) data;
+
+/**
+ * 方法说明：发送一些TSC的固定命令，在cls命令之前发送
+ * @return void
+ */
+-(void) addComonCommand;
+
+/**
+ * 方法说明:打印自检页，打印测试页
+ * @return void
+ */
+-(void) addSelfTest;
+
+/**
+ * 方法说明 :查询打印机型号
+ * @return void
+ */
+-(void) queryPrinterType;
+
+/**
+ * 方法说明:设置打印机剥离模式
+ * @param ON/OFF  是否开启
+ * @return void
+ */
+-(void) addPeel:(NSString *) strpar;
+
+/**
+ * 方法说明:设置打印机撕离模式
+ * @param ON/OFF 是否开启
+ * @return void
+ */
+-(void) addTear:(NSString *) strpar;
+
+/**
+ * 方法说明:设置切刀是否有效
+ * @param 是否开启 OFF/pieces (0<=pieces<=127)设定几张标签切一次
+ * @return void
+ */
+-(void) addCutter:(NSString *) strpar;
+
+/**
+ * 方法说明:设置切刀半切是否有效
+ * @param enable  是否开启
+ * @return void
+ */
+-(void) addPartialCutter:(NSString *) strpar;
+
+/**
+ * 方法说明：设置蜂鸣器
+ * @param level 频率
+ * @param interval  时间ms
+ * @return void
+ */
+-(void) addSound:(int) level :(int) interval;
+
+/**
+ * 方法说明：打开钱箱命令,CASHDRAWER m,t1,t2
+ * @param m  钱箱号 m      0，48  钱箱插座的引脚2        1，49  钱箱插座的引脚5
+ * @param t1   高电平时间0 ≤ t1 ≤ 255输出由t1和t2设定的钱箱开启脉冲到由m指定的引脚
+ * @param t2   低电平时间0 ≤ t2 ≤ 255输出由t1和t2设定的钱箱开启脉冲到由m指定的引脚
+ * @return void
+ */
+-(void) addCashdrawer:(int) m :(int) t1 :(int) t2;
+
+/**
+ * 方法说明:在标签上绘制黑块，画线
+ * @param x 起始横坐标
+ * @param y 起始纵坐标
+ * @param width 线宽，以点(dot)表示
+ * @param height 线高，以点(dot)表示
+ * @return void
+ */
+-(void) addBar:(int) x :(int) y :(int) width :(int) height;
+
+/**
+ * 方法说明:在标签上绘制矩形
+ * @param xstart 起始横坐标
+ * @param ystart 起始纵坐标
+ * @param xend 终点横坐标
+ * @param yend 终点纵坐标
+ * @param linethickness 矩形框线厚度或宽度，以点(dot)表示
+ * @return void
+ */
+-(void) addBox:(int) xstart :(int) ystart :(int) xend :(int) yend :(int) linethickness;
+
+/**
+ * 方法说明:查询打印机状态<ESC>!?
+	*询问打印机状态指令为立即响应型指令，该指令控制字符是以<ESC> (ASCII 27=0x1B, escape字符)为控制字符.!(ASCII 33=0x21),?(ASCII 63=0x3F)
+	*即使打印机在错误状态中仍能透过 RS-232  回传一个 byte  资料来表示打印机状态，若回传值为 0  则表示打印
+	*机处于正常的状态
+ * @return void
+ */
+-(void) queryPrinterStatus;
+
+/**
+ * 方法说明:将指定的区域反向打印（黑色变成白色，白色变成黑色）
+ * @param xstart 起始横坐标
+ * @param ystart 起始横坐标
+ * @param xwidth X坐标方向宽度，dot为单位
+ * @param yheight Y坐标方向高度，dot为单位
+ */
+-(void) addReverse:(int) xstart :(int) ystart :(int) xwidth :(int) yheight;
+
+@end